Here is another modern plan. Unique to my style is a scratch built chimney, mainly because you won't find one like it. Footprint is 3 3/8 x 3 1/2 and is a relativly easy build. The only hard part is cutting a roof notch for the chimney. It can be done in wood but sketches are based on styrene thicknesses. If you use another material adjust dimensions accordingly. Paint parts before assembly, except where the edges glue to other parts. Always check ahead in assembly sketches to see which surfaces may need to have paint removed before assembly.
The building directions and materials are in the sketches, and to make your build easier you can enlarge them to full size and print them out. Read directions in assembly sketches before cutting out parts as you may want to change some sizes or cut fewer, or additional, openings. Included sketches are: Overview sketches, Parts templates, Assembly sketches, and PDF's.
To print the part templates actual size, use the PDF's. Select best printer quality, set PDF zoom to 100%, and page scaling to "none" or actual size. Check your printed page to see that 3" lines are exactly 3" long. Once you have template printed, you can cut with scissors (leave a 1/8" border) and arrange on your material for maximum sheet usage. Part templates for siding are a mirror image, when needed, so that you can cut walls with siding side down (easier to cut). Be sure siding grooves are oriented correctly. Use rubber cement or Krylon Easy Tack Repositionable Adhesive to glue paper templates to your material and then just cut on lines. No measuring ! Paper comes off easily.
Cut out parts carefully using a SERB and straight edge. The best way to cut out window openings is with a corner punch. It is important to follow assembly sketches IN SEQUENCE or some parts may not fit. If you do printable shingles, print them on full sheet label paper.
With no interior walls, you may want to put curtains inside windows.
This is the second in a series of houses with names derived from family member names. My wife is Brenda Joyce but I thought that sounded corny for a house name so it became Brendalynn. Hah ! The first house was named after my sister Gayle, and it became Abigayle.
https://www.dropbox.com/s/sgex1umwj6d14ij/blypt1pdf.pdf?dl=0https://www.dropbox.com/s/z2mcnp6crgzxta3/blypt2pdf.pdf?dl=0https://www.dropbox.com/s/rfouzp64ih5q4ah/blypt3pdf.pdf?dl=0https://www.dropbox.com/s/40e1rl6rt63itbu/blypt4pdf.pdf?dl=0https://www.dropbox.com/s/8gv2n0lwp624sxo/blypt5pdf.pdf?dl=0
