« previous next »
Pages: [1]   Go Down

Author Topic: Which Micro-Trains Coupler for Kato SD45?  (Read 1826 times)

0 Members and 1 Guest are viewing this topic.

Kisatchie

  • Crew
  • *
  • Posts: 4180
  • Gender: Male
  • Respect: +62
Which Micro-Trains Coupler for Kato SD45?
« on: March 13, 2016, 10:03:20 PM »
0
I checked the MTL conversion chart, but it doesn't list Kato's SD45 loco.

Anyone know? Dee's no help.


Hmm... I'm guessing
either the 2001 or the
2004...

Logged
Two scientists create a teleportation ray, and they try it out on a cricket. They put the cricket on one of the two teleportation pads in the room, and they turn the ray on.
The cricket jumps across the room onto the other pad.
"It works! It works!"

jagged ben

  • Crew
  • *
  • Posts: 3256
  • Respect: +501
Re: Which Micro-Trains Coupler for Kato SD45?
« Reply #1 on: March 13, 2016, 10:10:10 PM »
0
If it's from the older runs (no snow plow)  then it's the 1015.  If it's from the last couple years then you need to put 1015 shanks inside a 2004 box.
Logged

Kisatchie

  • Crew
  • *
  • Posts: 4180
  • Gender: Male
  • Respect: +62
Re: Which Micro-Trains Coupler for Kato SD45?
« Reply #2 on: March 13, 2016, 10:20:13 PM »
0
Thanks!


Hmm... NOW maybe Kiz
will give me supper...

Logged
Two scientists create a teleportation ray, and they try it out on a cricket. They put the cricket on one of the two teleportation pads in the room, and they turn the ray on.
The cricket jumps across the room onto the other pad.
"It works! It works!"

jpwisc

  • Crew
  • *
  • Posts: 1171
  • Gender: Male
  • Respect: +2241
    • Skally Line Blog
Re: Which Micro-Trains Coupler for Kato SD45?
« Reply #3 on: March 13, 2016, 11:13:22 PM »
+1
I have a couple of the newer run SD45s and I run 1015s in the 1015 boxes. Works great. You just have to trim the small squares out of the corners of the coupler opening.
« Last Edit: March 13, 2016, 11:14:59 PM by jpwisc »
Logged
Karl
CEO of the WC White Pine Sub, an Upper Peninsula Branch Line.

ryan_wilkerson

  • Crew
  • *
  • Posts: 1082
  • Respect: +204
    • ShastaRails.com
Re: Which Micro-Trains Coupler for Kato SD45?
« Reply #4 on: March 14, 2016, 12:25:09 PM »
0
Quote from: jpwisc on March 13, 2016, 11:13:22 PM
I have a couple of the newer run SD45s and I run 1015s in the 1015 boxes. Works great. You just have to trim the small squares out of the corners of the coupler opening.

I've done the same as Karl. Only takes a couple minutes.
Logged

np1969

  • Posts: 24
  • Respect: +1
Re: Which Micro-Trains Coupler for Kato SD45?
« Reply #5 on: March 16, 2016, 11:03:07 PM »
0
Quote from: jagged ben on March 13, 2016, 10:10:10 PM
If it's from the older runs (no snow plow)  then it's the 1015.  If it's from the last couple years then you need to put 1015 shanks inside a 2004 box.

I agree with using 1015 shanks in 2004 boxes. I've tried using the 1015s in 1015 boxes (in the SD70ACe's), but the box is too thick and the clip keeps popping out. I've also tried sanding the 1015 boxes but that is a pain and takes more time than I'm willing to invest now.
Logged

Joetrain59

  • Crew
  • *
  • Posts: 1600
  • Gender: Male
  • Respect: +75
Re: Which Micro-Trains Coupler for Kato SD45?
« Reply #6 on: March 17, 2016, 02:43:17 AM »
0
Has anyone tried Z905's?
Joe D
Logged

SD452XR

  • Crew
  • *
  • Posts: 247
  • Respect: +17
Re: Which Micro-Trains Coupler for Kato SD45?
« Reply #7 on: March 17, 2016, 01:02:51 PM »
0
Can 2004 be used in a 1015 box? Wondering if its possible, not for the SD45 but just in general. Otherwise will have a bunch of 1015 boxes and 2004 shanks lying around. :)
Logged

Catt

  • Crew
  • *
  • Posts: 1721
  • Gender: Male
  • Respect: +28
    • Boylerwerx
Re: Which Micro-Trains Coupler for Kato SD45?
« Reply #8 on: March 17, 2016, 03:03:14 PM »
0
Kis,

 The KATO SD45 is on page 3 of the PDF and it says #1015.
Logged
Johnathan (Catt) Edwards
Sole owner of the
Grande Valley Railway
100% Michigan made

Kisatchie

  • Crew
  • *
  • Posts: 4180
  • Gender: Male
  • Respect: +62
Re: Which Micro-Trains Coupler for Kato SD45?
« Reply #9 on: March 17, 2016, 03:09:46 PM »
0
Quote from: Catt on March 17, 2016, 03:03:14 PM
Kis,

 The KATO SD45 is on page 3 of the PDF and it says #1015.

I just looked again, and there is the SD45 listed on page 4 for me. Shoulda scrolled down, but I thought pg 3 was the last one because of the big, empty space after the SD40-2.


Hmm... Thanks for
clearing that up...


Logged
Two scientists create a teleportation ray, and they try it out on a cricket. They put the cricket on one of the two teleportation pads in the room, and they turn the ray on.
The cricket jumps across the room onto the other pad.
"It works! It works!"

Mark5

  • Crew
  • *
  • Posts: 11036
  • Always with the negative waves Moriarty ...
  • Respect: +608
Re: Which Micro-Trains Coupler for Kato SD45?
« Reply #10 on: March 17, 2016, 06:27:32 PM »
0
The PDF is .... out of date
Logged

delamaize

  • Crew
  • *
  • Posts: 2401
  • Gender: Male
  • Prairie Line Native
  • Respect: +547
Re: Which Micro-Trains Coupler for Kato SD45?
« Reply #11 on: March 17, 2016, 08:50:04 PM »
+1
Logged
Mike

Northern Pacific, Tacoma Division, 4th subdivision "The Prarie Line" (still in planning stages)

jagged ben

  • Crew
  • *
  • Posts: 3256
  • Respect: +501
Re: Which Micro-Trains Coupler for Kato SD45?
« Reply #12 on: March 18, 2016, 12:27:32 AM »
0
Quote from: SD452XR on March 17, 2016, 01:02:51 PM
Can 2004 be used in a 1015 box? Wondering if its possible, not for the SD45 but just in general. Otherwise will have a bunch of 1015 boxes and 2004 shanks lying around. :)

Yes.
Logged
Pages: [1]   Go Up
« previous next »