Author Topic: Roof ..  (Read 1172 times)

0 Members and 1 Guest are viewing this topic.

John

  • Administrator
  • Crew
  • *****
  • Posts: 13412
  • Respect: +3263
Roof ..
« on: September 08, 2015, 07:40:59 PM »
0
So, I am building this ..

http://www.rrpicturearchives.net/showPicture.aspx?id=2817187

How do I make the roof :)


wcfn100

  • Crew
  • *
  • Posts: 8842
  • Respect: +1223
    • Chicago Great Western Modeler
Re: Roof ..
« Reply #1 on: September 08, 2015, 07:59:46 PM »
0
First move would be to contact Wheels of Time and see if you can get a couple roofs to piece together.

Something I did for a roof with a little different profile was to use a router.  I had then hand-notch the end to fit over the doors.



If the right size router was available, maybe you could get something close.

One final option could be to have it printed.  Could probably get it around $12 (plus shipping) with the expectation of sanding it to smooth it out.

Jason
« Last Edit: September 08, 2015, 08:04:12 PM by wcfn100 »

John

  • Administrator
  • Crew
  • *****
  • Posts: 13412
  • Respect: +3263
Re: Roof ..
« Reply #2 on: September 08, 2015, 08:29:47 PM »
0
I have the outline of the roof profile from the southern modeler site . .thats the proto type .. SOU 1041 ..  I am thinking of getting some balsa and starting from there, making a cutter knife from the profile ..  WOT is a possibility . not sure if they sell parts though ..

Nice model btw .. is it scratch built?


sirenwerks

  • Crew
  • *
  • Posts: 5849
  • Gender: Male
  • Respect: +381
Re: Roof ..
« Reply #3 on: September 08, 2015, 08:36:34 PM »
0
I think it was Des Plaines that made a modernized roof in two lengths, but I think they were being discontinued back when I got mine.  They may still have some.  I'd give you the ones I have if I could get to the boxes buried in storage.
Failing to prepare is preparing to fail.

Philip H

  • Crew
  • *
  • Posts: 8921
  • Gender: Male
  • Respect: +1658
    • Layout Progress Blog
Re: Roof ..
« Reply #4 on: September 08, 2015, 08:43:10 PM »
0
So I agree with the WOT suggestion as easy. If that falls through I'd get a stick of basswood (I'm not a big balsa fan) and draw out the curve on the ends. Then you can use a band saw. A scroll saw, a coping saw or even a small block plane to get your curve. Then round over the ends. Not exactly easy-peasy but doable.
Philip H.
Chief Everything Officer
Baton Rouge Southern RR - Mount Rainier Division.


wcfn100

  • Crew
  • *
  • Posts: 8842
  • Respect: +1223
    • Chicago Great Western Modeler
Re: Roof ..
« Reply #5 on: September 08, 2015, 09:07:47 PM »
0

Nice model btw .. is it scratch built?

It's just a cut down WOT car. 

Here's what I was going for.




Jason

Bob Bufkin

  • Crew
  • *
  • Posts: 6397
  • Gender: Male
  • Respect: +44
Re: Roof ..
« Reply #6 on: September 08, 2015, 09:11:15 PM »
0
If you can't find the right parts, go with balsa.  I know I read an article years ago in one of the model mags where they built these roofs using balsa.

Bob Bufkin

  • Crew
  • *
  • Posts: 6397
  • Gender: Male
  • Respect: +44
Re: Roof ..
« Reply #7 on: September 08, 2015, 09:13:13 PM »
0
Almost forgot about these.

http://www.prr-parts.com/Page2.html

chicken45

  • Crew
  • *
  • Posts: 4500
  • Gender: Male
  • Will rim for upvotes.
  • Respect: +1013
    • Facebook Profile
Re: Roof ..
« Reply #8 on: September 08, 2015, 09:37:34 PM »
0
Almost forgot about these.

http://www.prr-parts.com/Page2.html

Yup...Bob beat me to it. You'll have to probably use two and splice them because these are for 70 footers.
The vents are separate so you'll not have to sand them off.
Josh Surkosky

Here's a Clerihew about Ed. K.

Ed Kapucinski
Every night, he plants a new tree.
But mention his law
and you've pulled your last straw!

Alternate version:
Ed Kapucinski
Every night, he plants a new tree.
He asks excitedly "Did you say Ménage à Trois?"
No, I said "Ed's Law."