RAIL N SCALE Miniature world

[RAIL N SCALE]

Hi,

Advent Offers – Save 15% on selected products
In the four Advent weeks for Christmas we present new offers every week. On the first Advent Sunday, these are products in era I. And so on until era IV.

2nd Week of Advent Offers
During this week we offer several Era II products with a reduction of no less than 15%. This offer ends December 16th.



Check-out our brochure: https://railnscale.files.wordpress.com/2017/12/2e-advent-offers.pdf
Or visit us at Shapeways: https://www.shapeways.com/shops/rail-n-scale?section=2nd+week+Advent+Offers&s=0

Kind regards,
Maurice
RAILNSCALE

[Ed Kapuscinski]

Wanted to mention: I'm using the DAS clay and roller option for all of the paving in York on my layout. It's a joy to work with. Thank you for turning me onto it.

I have a thought about rollers though. Would it make sense to make the "head" of the cutting bit shaped a little differently, to make it displace material a little easier/better? Like, make it pointed or rounded or something like that.

[RAIL N SCALE]

Hi Ed,

Thanks. It is good to see that the rollers work nicely. Could you maybe post some photos of your layout? It is always nice to see some results.
I'm not sure whether I understand your suggestion correctly.

Regards,
Maurice

[RAIL N SCALE]

Hey all,

Advent Offers – Save 15% on selected products
In the four Advent weeks for Christmas we present new offers every week. On the first Advent Sunday, these are products in era I. And so on until era IV.

3rd Week of Advent Offers
During this week we offer several Era III products with a reduction of no less than 15%. This offer ends December 23rd.



Check-out our brochure: https://railnscale.files.wordpress.com/2017/12/3e-advent-offers.pdf
Or visit us at Shapeways: https://www.shapeways.com/shops/rail-n-scale?section=3rd+week+Advent+Offers&s=0

Kind regards,
Maurice
RAILNSCALE

[RAIL N SCALE]

Hi,

We made a little video about the container waggons:
https://youtu.be/McoswFiMIWo

Best,
Maurice
RAILNSCALE
https://railnscale.com/

[RAIL N SCALE]

Hi,

As we're nearing Christmas we start our 4th week of Advent Offers.
During this week we offer several Era IV products with a reduction of no less than 15%. This offer ends December 30th.



Check-out our brochure: https://railnscale.files.wordpress.com/2017/12/4e-advent-offers.pdf
Or visit us at Shapeways: https://www.shapeways.com/shops/rail-n-scale?section=4th+week+Advent+Offers&s=0

Kind regards,
Maurice
RAILNSCALE

[RAIL N SCALE]

Hi,

New Year Specials – Save 18% on our most popular products
To celebrate the New Year we offer our most popular products with a reduction of no less than 18%. This offer ends January 1st 2018. Be quick!


Link: https://railnscale.com/2017/12/29/happy-2018-save-18/

Best,
Maurice

[RAIL N SCALE]

Hi,

Coconut fat wagons C. Bolle A.G. (Era II)
In 1927, wagons with removable coconut fat tanks were built for the first time. The dairy C. Bolle A.G. Berlin had such wagons. The tanks rest on casters. Over ten such wagons have been in circulation.
The model consists of unpainted parts which can be mounted on a chassis of Mafen (Art. No. 149.05, 149.07, 149.09, or similar).

The following kits are available:
N1010 - Coconut fat wagon






N1510 - SET 2x Coconut fat wagon



Decals are available in .svg-format.

We made a little video of this novelty: https://youtu.be/d8Qx0pmICDI

More info: https://railnscale.com/2018/01/02/kokosfettwagen/

Kind regards,
Maurice
https://railnscale.com/

[RAIL N SCALE]

Hi,

New: 8x Steam engine crew
With a train driver and fireman, a steamer certainly looks much more lively. The locomotive staff fits in almost every tank locomotive. This kit (N3956) contains eight different motivated characters who would like to set your locomotive in motion. Models are delivered unpainted.








More information and building instructions: https://railnscale.com/2018/01/06/8x-lokpersonal/

Kind regards,
Maurice
RAILNSCALE

[RAIL N SCALE]

Hi,

Simca Aronde 1300 (Era III)
The Simca Aronde was the first independent development of Simca. The Aronde was a popular vehicle. Partly because of this, Simca became the second largest French car manufacturer in the 1950s. The kit is a replica of the Simca Aronde 1300 from the years 1955-’58. The model consists of two unpainted parts.

Available are:
N2127 - Simca Aronde 1300






N2627 - SET 2x Simca Aronde 1300






More information: https://railnscale.com/2018/01/12/simca-aronde-1300/

Kind regards,
Maurice
RAILNSCALE

[RAIL N SCALE]

Hi,

This time we present to you our second version of the Basel Tramway for narrow Nm-Gauge.

About the tram
This tram is a replica of the Basel tramway (Nr 22″-55″). The railcar dates from 1898. The motor car was put on the rails in 1898. In the 1930s, the cars underwent one last major conversion. After the entrance doors had already been moved against the car body earlier, scissor pantographs and more powerful engines were used. The wheelbase was increased again to 2.6 meters. The motorcars found use on typical city lines until the end of the 1960s. As their example these trams are designed for narrow gauge tracks (6.5 mm Nm).
The kits are unpainted and are supplied without and pantograph chassis. The couplings are functional.
The Busch Feldbahnwagen driveline Nr. 12199 fits without modification. Pantographs of the company Tomix (Nr. 0238) fit perfectly. Busch H0f tracks are recommended.

Available are:
N1103 - Motor coach Ce2/2 (Nm 1:160)





N1603 - SET 2x Motor coach Ce2/2 (Nm 1:160)



We made a little video showing how the tram runs. Without modification of the Busch-unit the tram runs at a very realistic velocity of 22 km/h or almost 14 mph. In reality these trams were driving at 12 to 16 mph. Because the drive line and the Busch tracks are equipped with a magnet the electrical contact is good.
https://youtu.be/fddqx5_qUmA

More info: https://railnscale.com/2018/01/20/basler-tramway-ep-ii-iii/

We offer pavement rollers to create the perfect tramway rails: https://railnscale.com/construction/paved-track-zn/

Best regards,
Maurice
RAILNSCALE

[RAIL N SCALE]

NEW: Waste containers and bin bags (Era III-V)
Of course, the residents of the model train layout must also get rid of their waste. These classic trash cans and trash bags are indispensable. To dispose of the waste, we offer a suitable garbage truck. Models are delivered unpainted.

Available are:
N3163 - 10 Waste containers




N3165 - 20 Bin bags




N3663 - SET Waste containers and bin bags




More information: https://railnscale.com/2018/02/11/mulltonnen-und-mullsacke/

Kind regards,
Maurice
RAILNSCALE

[RAIL N SCALE]

And I'm proud to present the next novelties,

NEW: N3161 - 10 Street dustbins
Of course, the residents of the model train layout must also get rid of their waste. These modern street dustnins are indispensable. These small dustbins fit in all parks and streets. Models are delivered unpainted.







More about these novelties: https://railnscale.com/2018/02/13/abfallbehalter/

Kind regards,
Maurice
RAILNSCALE

[RAIL N SCALE]

Hi,

New by RAILNSCALE: Mobile working platform (Era IV-VI)
Mobile working platforms can be found in workshops, museums, public facilities or other industrial locations. The kit comprises two unpainted mobile working platforms.

Available kit:
N3166 - 2 Mobile working platforms







More information: https://railnscale.com/2018/02/16/arbeitsbuhne/

Best regards,
Maurice
RAILNSCALE

[RAIL N SCALE]

Hi,

We've released some new items that would fit nicely on your layout:

N3160 - 10 Garbage containers
These modern plastic garbage containers can serve as a finishing touch on your layout. The garbage containers can be placed down the street or in the garden. The kit contains 10 unpainted garbage containers.




More: https://railnscale.com/2018/02/17/abfalltonnen/

N3162 - 2 Roll-off containers
A waste recycling center lay-out can’t do without roll-off containers. Of course, the roll-off containers are just as suitable on an industrial area. The model contains two containers (ribfree roll-off container, according DIN 30722). Models are delivered unpainted.




More: https://railnscale.com/2018/02/18/abrollcontainer/

N3164 - 2 Trolley bins
For the design of a waste recycling center one can not do without trolley bins. The lids of the trolley bins are movable. Closed or opened, everything is possible. The model contains two containers. Models are delivered unpainted.






More:​ https://railnscale.com/2018/02/18/umleerbehalter/

Kind regards,
Maurice
RAILNSCALE
https://railnscale.com/