Source For Super Thin Cut-off Disks . . . . Anyone?

[TrainCat2]

I need to order some that are .015 or thinner TODAY for tomorrow AM. Day job related.

Anyone have a source?

[Cajonpassfan]

Bob, I use Gyros Precisison disks, Monsey, New York. Don't know about the "today" part...www.gyrostools.com
Good luck,
Otto K.

[Denver Road Doug]

I'm stealing someone else's thunder here, in the interest of time, but someone posted the following info not long ago on here:

Dremel, with ultra-thin (.005") separating discs.  Best for cutting gaps in track.
http://www.dedeco.com/product/935/B-Stylefont-familyminion-Black-Letter-spacing2pxELITEbbrSEPARATING-DISCS-BrALUMINUM-OXIDE-Br-78-X-005-Br-25BX/5501/

Beware, I have no knowledge or experience with this company.  I just copied this into my "to purchase" file.

[M.C. Fujiwara]

I use the Dedeco .009" A/O cutting discs.
http://www.dedeco.com/product/807/AO-THIN-DISCSbr-78-X-009-Br-100BX/5183/
(.005" is too thin, methinks)

But have no clue if they can deliver in a day.

[TrainCat2]

I use the Dedeco .009" A/O cutting discs.
http://www.dedeco.com/product/807/AO-THIN-DISCSbr-78-X-009-Br-100BX/5183/
(.005" is too thin, methinks)

+1

Guys, thanks. I tried search and could not find the link here. Don't remember going into that thread, so I am not surprised I did not find it. Ordered the .009 and shipping was x2 the item costs, but I have a piece of equipment down in the shop and the downtime is $1000/day. Worth every penny.

[Freight Train]

Ace Hardware sells Dremel and replacement discs under their brand name (Ace). Same as the Dremel cutoff disc.

[Chris333]

The thinnest Dremel wheels are .025" thick. I use the Dedeco for cutting gaps in PC ties because they are just as wide as a Zona saw blade.