BLI E unit?

[CBQ Fan]

I don't run DCC and I have two Broadway Limited E units.  Is there anyway to turn the sound and delayed acceleration off so they will run like a standard DC loco?

[pjm20]

 

[jagged ben]

I'm going off the manual for my new PA units but if yours is also a Paragon 2 unit then it should be the same info.

It looks like you can set CV 133 to zero to turn the sound off, and CV248 to zero to eliminate the motor start delay.  .  This will probably not significantly decrease the start voltage though.

You'll either need to find a friend with a DCC system to set the CVs or buy their DC Master Analog Control Module product.



 

[CBQ Fan]

I'm going off the manual for my new PA units but if yours is also a Paragon 2 unit then it should be the same info.

It looks like you can set CV 133 to zero to turn the sound off, and CV248 to zero to eliminate the motor start delay.  .  This will probably not significantly decrease the start voltage though.

You'll either need to find a friend with a DCC system to set the CVs or buy their DC Master Analog Control Module product.

Thanks. I saw the control module thing but was not sure if it would do what I wanted.