« previous next »
Pages: [1]   Go Down

Author Topic: Hate being negative ;)  (Read 945 times)

0 Members and 1 Guest are viewing this topic.

JoeD

  • Crew
  • *
  • Posts: 1871
  • Gender: Male
  • Respect: +1187
Hate being negative ;)
« on: October 12, 2023, 02:08:54 PM »
0
I got one for you...,all of a sudden all 4 of my Photon Mono X's are printing  backwards right to left.  Everything is in reverse !!!   :(  I can mirror the stuff I send to it, but I've never seen anything like this.   Anyone else having this issue.?  Generated an STL file with an arrow and lettering on a different computer and go tthe same result.

Joe
Logged
in my civvies here.  I only represent my grandmothers home made Mac and Cheese on Railwire.

dem34

  • Crew
  • *
  • Posts: 1660
  • Gender: Male
  • Only here to learn through Osmosis
  • Respect: +1192
Re: Hate being negative ;)
« Reply #1 on: October 12, 2023, 02:20:24 PM »
+1
Any of the USBs used for file management have a firmware image on them? Maybe something corrupted. I would try flashing fresh firmware on one and re-installing the slicer software.
Logged
-Al

JoeD

  • Crew
  • *
  • Posts: 1871
  • Gender: Male
  • Respect: +1187
Re: Hate being negative ;)
« Reply #2 on: October 12, 2023, 02:30:33 PM »
0
Quote from: dem34 on October 12, 2023, 02:20:24 PM
Any of the USBs used for file management have a firmware image on them? Maybe something corrupted. I would try flashing fresh firmware on one and re-installing the slicer software.

did not think of that...thank you!!
Logged
in my civvies here.  I only represent my grandmothers home made Mac and Cheese on Railwire.

John

  • Administrator
  • Crew
  • *****
  • Posts: 13386
  • Respect: +3245
Re: Hate being negative ;)
« Reply #3 on: October 12, 2023, 02:48:44 PM »
+1
Quote from: dem34 on October 12, 2023, 02:20:24 PM
Any of the USBs used for file management have a firmware image on them? Maybe something corrupted. I would try flashing fresh firmware on one and re-installing the slicer software.

Be careful before flashing .. can cause more problems than it fixes ..   Read this first   https://www.chitubox.com/en/article/support/howto/chitubox-free/slicing/44

1) Reboot the printer
2) get a new USB formatted
3) Check the slicer software settings
4) Print the cube file or the RERF test file
5) Print an older file ..
« Last Edit: October 12, 2023, 02:53:26 PM by John »
Logged

Chris333

  • Crew
  • *
  • Posts: 18392
  • Respect: +5662
Re: Hate being negative ;)
« Reply #4 on: October 12, 2023, 03:51:23 PM »
0
My printer shows the thumbnail on the screen sideways. Might have something to do with Chitubox (slicer).
Logged

haasmarc

  • Crew
  • *
  • Posts: 481
  • Gender: Male
  • Respect: +813
Re: Hate being negative ;)
« Reply #5 on: October 12, 2023, 05:27:24 PM »
+1
If you are using Chitubox for the slicer, I think there is an option to mirror under the Machine tab.  Maybe that got changed accidentally.
Logged
Marc Haas
Keeping the Reading alive in N scale!

ednadolski

  • Crew
  • *
  • Posts: 4809
  • Respect: +1756
Re: Hate being negative ;)
« Reply #6 on: October 12, 2023, 09:44:38 PM »
0
Is there a canned 'test print' file that came with the printers?
Logged

bbussey

  • Crew
  • *
  • Posts: 8889
  • Gender: Male
  • Respect: +4712
    • www.bbussey.net
Re: Hate being negative ;)
« Reply #7 on: October 13, 2023, 01:19:37 AM »
+1
Quote from: haasmarc on October 12, 2023, 05:27:24 PM
If you are using Chitubox for the slicer, I think there is an option to mirror under the Machine tab.  Maybe that got changed accidentally.

Sure sounds as if this is the reason.  It's extremely odd that all four printers started mirror-printing simultaneously.
Logged
Bryan Busséy
NHRHTA #2246
NSE #1117
www.bbussey.net

Jesse6669

  • Crew
  • *
  • Posts: 578
  • Respect: +1287
Re: Hate being negative ;)
« Reply #8 on: October 13, 2023, 09:01:37 AM »
0
Try pulling the plug out and reversing the poles  :trollface: :ashat:
Logged

Mdrzycimski

  • Crew
  • *
  • Posts: 40
  • Gender: Male
  • Respect: +9
Re: Hate being negative ;)
« Reply #9 on: October 13, 2023, 08:46:59 PM »
0
Quote from: Jesse6669 on October 13, 2023, 09:01:37 AM
Try pulling the plug out and reversing the poles  :trollface: :ashat:

 :facepalm: :D
Logged
Mike

The Southview Lines
N Scale
Pages: [1]   Go Up
« previous next »