RS Lazerkits

[basementcalling]

They have some nice concrete block sheets but I can't figure out the difference between pattern block and concrete block and either one of those with and without backing?

https://www.modeltrainstuff.com/rs-laser-kits-n-3705-concrete-block-sheeting-without-backing/

https://www.modeltrainstuff.com/rs-laser-kits-n-3710-patterned-block-sheeting-with-backing/

https://www.modeltrainstuff.com/rs-laser-kits-n-3709-patterned-block-sheeting-without-backing/

[basementcalling]

Buehler? Buehler? Anyone?

[Rasputen]

The patterned block seems to have random blocks with a pattern cut into their face, perhaps to simulate a damaged block?

[dnhouston]

The backing is the adhesive backing - does it have it or not.

[rslaserkits]

HI
 Rich here, Yes the Patterned block have random broken block. We supply 3M 467 peal and stick on the sheets with backing. This is Commercial grade  Transfer tape that is used on Veneer when they reface cabinets. If it holds up on Kitchen cabinets should be good enough for models
rich
rslaserkits

[Doug G.]

I never knew Radio Shack made lazerkits. 

Sorry.

Doug

[basementcalling]

HI
 Rich here, Yes the Patterned block have random broken block. We supply 3M 467 peal and stick on the sheets with backing. This is Commercial grade  Transfer tape that is used on Veneer when they reface cabinets. If it holds up on Kitchen cabinets should be good enough for models
rich
rslaserkits

got what I ordered today and I'm very impressed. Love the 3m stickum backing. Rich if you guys thought about doing the corrugated aluminum siding in sheets designed to make Butler bins? Should be fairly easy using Scotch tape or masking tape course as the base.

[rslaserkits]

Our Corrugated sheets are printed paper cut into sheets a scale 3 ft by 10 Ft. Do have real Aluminum sheets but they are spendy at about a buck pre 1 inch by 8 inch sheet.  The paper looks good and I use it on the Harris Door kit.
rich