« previous next »
Pages: [1]   Go Down

Author Topic: Bachmann GP 7 coupler  (Read 1263 times)

0 Members and 1 Guest are viewing this topic.

phil55

  • Crew
  • *
  • Posts: 99
  • Gender: Male
  • Respect: +13
Bachmann GP 7 coupler
« on: February 16, 2015, 06:55:06 PM »
0
Anyone know the Micro Trains coupler conversion for this locomotive?
Logged
Phil

Catt

  • Crew
  • *
  • Posts: 1721
  • Gender: Male
  • Respect: +28
    • Boylerwerx
Re: Bachmann GP 7 coupler
« Reply #1 on: February 16, 2015, 09:01:43 PM »
0
I just checked their conversion chart and they don't have it listed.I don't have any so I'm not really going to be much help.Come to think of it I didn't see my B-30 listed either but I used 2004s for them.
Logged
Johnathan (Catt) Edwards
Sole owner of the
Grande Valley Railway
100% Michigan made

Bob Horn

  • Crew
  • *
  • Posts: 171
  • Gender: Male
  • Respect: +1
Re: Bachmann GP 7 coupler
« Reply #2 on: February 16, 2015, 09:56:38 PM »
0
I have one on my desk which appears to have Z couplers installed. They appear to be straight shank or 1015 type. A 2004 is an offset shank coupler. Bob.
Logged

Catt

  • Crew
  • *
  • Posts: 1721
  • Gender: Male
  • Respect: +28
    • Boylerwerx
Re: Bachmann GP 7 coupler
« Reply #3 on: February 16, 2015, 10:58:09 PM »
0
Quote
A 2004 is an offset shank coupler.

Which is why I ended up using them.The 1015s were to low but the 2004s worked great.I think I will probably switch over to the 905s after I get a few dozen other projects done.
Logged
Johnathan (Catt) Edwards
Sole owner of the
Grande Valley Railway
100% Michigan made

Viperjim1

  • Crew
  • *
  • Posts: 133
  • Respect: +8
Re: Bachmann GP 7 coupler
« Reply #4 on: February 17, 2015, 06:14:54 PM »
0
I have a
Ot of micro conversions I'll check In the next day or so as I'm rebuilding a kitchen , I'll let you know
Logged

Viperjim1

  • Crew
  • *
  • Posts: 133
  • Respect: +8
Re: Bachmann GP 7 coupler
« Reply #5 on: February 21, 2015, 02:38:56 PM »
0
I have a couple Microtrains conversion packs in front of me 1134 or ( 001 33 031) 2 pair couplers with conversions for use with Bachmann and also 1133 (001 00 133 ) for use with newer Bachmann locos medium shank, hope this helps.
Logged

Missaberoad

  • Crew
  • *
  • Posts: 3569
  • Gender: Male
  • Ryan in Alberta
  • Respect: +1170
Re: Bachmann GP 7 coupler
« Reply #6 on: February 21, 2015, 02:42:57 PM »
0
Compare the coupler pocket to a Micro trains guage (or a truck mounted coupler)

If the top of the coupler lines up use a 1015 if the coupler is too high use a 2004...

You might need to carve away an existing coupler box to mount it... This was the case on the 44tonner
Logged
Quote from: DirtyD79 on January 21, 2024, 12:21:37 PM
The Railwire is not your personal army.  :trollface:
Pages: [1]   Go Up
« previous next »