« previous next »
Pages: [1]   Go Down

Author Topic: Yet another MT problem  (Read 2694 times)

0 Members and 1 Guest are viewing this topic.

Chris333

  • Crew
  • *
  • Posts: 18396
  • Respect: +5667
Yet another MT problem
« on: February 03, 2007, 04:59:19 PM »
0
Looking for something to do in N scale I picked a MT composite gondola out of my stash. Figured I would lower it add Z scale couplers and try my best Tom Mann on it... then I looked online to find anything close to it.

On the left is what it should look like:



You can see I drew a line in pencil and carved out the openings with a Xacto.

Is there anything out there that matches the MT car?
« Last Edit: February 03, 2007, 05:33:09 PM by Chris333 »
Logged

up1950s

  • Crew
  • *
  • Posts: 9752
  • Gender: Male
  • Respect: +2314
Re: Yet another MT problem
« Reply #1 on: February 03, 2007, 05:18:03 PM »
0
Looks great Chris . Damn , I wasn't aware that they ALL were supposed to have open webbing .
Logged


Richie Dost

Chris333

  • Crew
  • *
  • Posts: 18396
  • Respect: +5667
Re: Yet another MT problem
« Reply #2 on: February 03, 2007, 05:25:05 PM »
0
Logged

wm3798

  • Crew
  • *
  • Posts: 16126
  • Gender: Male
  • I like models. She likes antiques. Perfect!
  • Respect: +6468
    • Western Maryland Railway Western Lines
Re: Yet another MT problem
« Reply #3 on: February 03, 2007, 06:20:20 PM »
0
I have one of these things, and it never bothered me... UNTIL NOW.  Geez Chris, doesn't it bother you all the sleepless nights you cause around here?!?!

Lee
Logged
Rockin' It Old School

Lee Weldon www.wmrywesternlines.net

Sokramiketes

  • Crew
  • *
  • Posts: 4974
  • Better modeling through peer pressure...
  • Respect: +1530
    • Modutrak
Re: Yet another MT problem
« Reply #4 on: February 03, 2007, 06:22:08 PM »
0
Don't forget to carve off the rivets down there now that the wood planks are gone.

Rock Island was the same way for sure, most were probably.  MT did this presumably to hide the thcker underframe.  Are you just going to leave the underframe black so it doesn't look too apparent?

RI had some of these converted to TOFC service, but all the wood was removed so just the bridge truss was remaining.  Since you're having fun carving, one of those would be cool too.   ;)
Logged

wcfn100

  • Crew
  • *
  • Posts: 8841
  • Respect: +1221
    • Chicago Great Western Modeler
Re: Yet another MT problem
« Reply #5 on: February 03, 2007, 06:59:38 PM »
0
Man, you almost had me in a panic.:o  But thankfully, straight sides.  I distressed the sides and weathered it about ten years ago, and recently lowered it, and added the 905's, lp wheels and the air lines.  I thought I was going have to go back and do more.



And if you noticed the missing stirrup, feel free to send me one since I can't seem to remember to buy one. ;D

Jason
Logged

Chris333

  • Crew
  • *
  • Posts: 18396
  • Respect: +5667
Re: Yet another MT problem
« Reply #6 on: February 04, 2007, 03:53:02 AM »
0
Lee, It didn't bother me either till I tried to find one on-line. Then Mt smacked me right in the face with their fiction.

Mike, The underframe would peek through before I touched it, so now it would be even worse. I imagine the underframe will just be strips of sheet lead with no real detail. (P.S. I'm not carving off rivets  :-* )

Jason, You can order just about any MT part, but it has to go through a MT dealer (like Chuck) I have a few packets of stirrups from them along with extra boxcar doors and brakewheels. Usually a whole pack of parts is less than a dollar.
Logged
Pages: [1]   Go Up
« previous next »