« previous next »
Pages: [1]   Go Down

Author Topic: P-B-L Liquid Flux  (Read 1222 times)

0 Members and 1 Guest are viewing this topic.

Cajonpassfan

  • Crew
  • *
  • Posts: 5393
  • Respect: +1961
P-B-L Liquid Flux
« on: February 16, 2015, 11:31:23 PM »
0
Recently I filled out an order of Neolube with a bottle of non-corrosive liquid flux from P-B-L. Tried it tonight and love it. It comes with a fine dispenser tube that allows precise placement and it doesn't seem to have that awful smoky smelly evaporation effect. Unfortunately, while I didn't spill the Neolube, I didn't quite tighten the cap on the flux bottle all the way and it leaked all over the bottle and my hands :facepalm: Embarrassing...

Now the bottle is gooey and worse, so are my hands. Instructions on bottle suggest warm soapy water, but that doesn't seem to do much....what kind of liquid base cleaner would work on flux? I tried denatured alcohol and Goo Gone and now I smell of booze and oranges but my hands are still sticky ... My wife locked herself in the bedroom  :?
Help? Soon?
Otto K.
Logged

Missaberoad

  • Crew
  • *
  • Posts: 3569
  • Gender: Male
  • Ryan in Alberta
  • Respect: +1170
Re: P-B-L Liquid Flux
« Reply #1 on: February 16, 2015, 11:48:13 PM »
0
Dish-washing detergent? or maybe an industrial hand cleaner with an abrasive mixed in...
Logged
Quote from: DirtyD79 on January 21, 2024, 12:21:37 PM
The Railwire is not your personal army.  :trollface:

peteski

  • Crew
  • *
  • Posts: 32958
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +5343
    • Coming (not so) soon...
Re: P-B-L Liquid Flux
« Reply #2 on: February 17, 2015, 12:26:47 AM »
0
The amber color seems to indicate that is is a rosin dissolved in some liquid (probably alcohol).  Rosin is also sticky once the solvent evaporates.  Kind of like pine pitch.

From what I can read on the label in the picture of the bottle, there are instructions for removing it from the item being soldered (not the contact with skin instructions). What do they recommend removing it with?

You might simply need to clean your hands with alcohol several times.  Moisten a paper towel with alcohol (denatured should work ok) and wipe your hands with the paper towel. Then take another sheet of dry paper towel and dry your hands with it.  Repeat if needed.
Logged
. . . 42 . . .

victor miranda

  • Crew
  • *
  • Posts: 1604
  • Respect: +2
Re: P-B-L Liquid Flux
« Reply #3 on: February 17, 2015, 12:36:36 AM »
0
I am surprised denatured alcohol didn't get that off.

I would try in order. boraxo. bonami, comet, acetone, ....

after those, if you have no fingerprints left...
use sticky finger for what God intended

making sure your favorite girl doesn't slip out of your hands.


luck.

victor
Logged

draskouasshat

  • Crew
  • *
  • Posts: 987
  • Gender: Male
  • Respect: +643
Re: P-B-L Liquid Flux
« Reply #4 on: February 17, 2015, 12:41:32 AM »
0
Otto, for your hands,  I would try mineral spirits but not on the bottle. For the bottle, I would try some gasoline ok a rag. That should take it off without effecting the plastic.
Logged
Draskos Modelworks. Contact me for your 3D modeling needs!
SFM (Super Fleet Modeler) member #1
I HAVE 3800 class santa fe 2-10-2s!!

up1950s

  • Crew
  • *
  • Posts: 9752
  • Gender: Male
  • Respect: +2314
Re: P-B-L Liquid Flux
« Reply #5 on: February 17, 2015, 01:15:14 AM »
0
Maybe Googone , but then you need to wash your hands with a rescue pad and various brands of detergent and Scope mouth wash .
Logged


Richie Dost

Cajonpassfan

  • Crew
  • *
  • Posts: 5393
  • Respect: +1961
Re: P-B-L Liquid Flux
« Reply #6 on: February 17, 2015, 01:35:17 AM »
0
Thanks guys, appreciate the responses! The GooGone and Formula 409 did the trick, I think I'm safe. The Atlas frog solder joint connections seem to be holding, too. Installed and soldered 12 Tortoises and assorted Switch 8's  and Switch It's today. Happy Presidents' Day. Goo is off. Life's good!
Otto K.
« Last Edit: February 17, 2015, 01:42:11 AM by Cajonpassfan »
Logged

Joetrain59

  • Crew
  • *
  • Posts: 1600
  • Gender: Male
  • Respect: +75
Re: P-B-L Liquid Flux
« Reply #7 on: February 17, 2015, 02:43:51 AM »
0
But did the Wife unlock the door?  :D
 Who is PBL?
 Joe D
Logged

arbomambo

  • Crew
  • *
  • Posts: 1419
  • Respect: +1137
Re: P-B-L Liquid Flux
« Reply #8 on: February 17, 2015, 09:55:29 AM »
0
Quote from: Cajonpassfan on February 17, 2015, 01:35:17 AM
Thanks guys, appreciate the responses! The GooGone and Formula 409 did the trick, I think I'm safe. The Atlas frog solder joint connections seem to be holding, too. Installed and soldered 12 Tortoises and assorted Switch 8's  and Switch It's today. Happy Presidents' Day. Goo is off. Life's good!
Otto K.

Thank Goodness...and great work!
Happy Mardi Gras!!!!!
~Bruce
Logged
"STILL Thrilled to be in N scale!"

Bruce M. Arbo
CATT- Coastal Alabama T-TRAK
https://nationalt-traklayout.com/

Papa David

  • Posts: 11
  • Respect: 0
Re: P-B-L Liquid Flux
« Reply #9 on: February 17, 2015, 10:17:43 AM »
0
P-B-L, at p-b-l.com, specializes in finescale Sn3 products (locomotives, rolling stock, parts, etc.)  They also have a nice selection of solders, tools, etc.  (I have no connection with P-B-L.)
Logged

Cajonpassfan

  • Crew
  • *
  • Posts: 5393
  • Respect: +1961
Re: P-B-L Liquid Flux
« Reply #10 on: February 17, 2015, 10:20:38 AM »
0
Quote from: Joetrain59 on February 17, 2015, 02:43:51 AM
But did the Wife unlock the door?  :D
 Who is PBL?
 Joe D

Yes 8)
Logged

Joetrain59

  • Crew
  • *
  • Posts: 1600
  • Gender: Male
  • Respect: +75
Re: P-B-L Liquid Flux
« Reply #11 on: February 17, 2015, 09:14:33 PM »
0
Thanks Papa. Always good to have another source.
 Otto, good luck;)
 Joe D
Logged
Pages: [1]   Go Up
« previous next »