Digitrax DCS-200 - Red wire came off inside unit

[kiwi_al]

I just thought I'd ask before I go much further if anyone has an old Digitrax DCS-200 and is willing to remove the 4 screws holding it together and pulling the white connector off the front. I would like a picture / photo of the main circuit board underneath showing where the black and red wires are soldered to.
My red wire has come off from the circuit board and the power connector.

[mmyers]

I won't have one available for a couple of weeks. If you still haven't found out by then, I will be changing out the batteries in two of them and will post a photo for you. If anyone has a DCS100, the wires should be the same inside.

[kiwi_al]

Fixed it and ran 2 Kato FEF-3's 

[kiwi_al]

I won't have one available for a couple of weeks. If you still haven't found out by then, I will be changing out the batteries in two of them and will post a photo for you. If anyone has a DCS100, the wires should be the same inside.

Thank you, but I figured it out. It's the first terminal solder point next to the black wire