« previous next »
Pages: [1]   Go Down

Author Topic: Kato SD40 with Lok V5 kato replacement board  (Read 852 times)

0 Members and 1 Guest are viewing this topic.

TravelingCarpenter

  • Crew
  • *
  • Posts: 76
  • Respect: +98
Kato SD40 with Lok V5 kato replacement board
« on: May 29, 2022, 11:28:12 PM »
+3
Hey,
     Another sound install that was pretty easy.
DCC ready frame, was able to use Lok Sound V5 58741
Front and rear headlights are pre-wired 603 smd LED's
Soberton 8mm x 12mm speaker in a Keystone details enclosure.

    I just had to do a little milling on the rear to allow for the height of the speaker/enclosure. Over all,,went pretty smooth. Sound file loaded quickly, 26 minutes. File used S0710 16 cylinder 645E3 prime mover.




Laters,
  TC
« Last Edit: May 29, 2022, 11:30:29 PM by TravelingCarpenter »
Logged

GM50 4164

  • Crew
  • *
  • Posts: 231
  • Respect: +100
Re: Kato SD40 with Lok V5 kato replacement board
« Reply #1 on: May 29, 2022, 11:39:50 PM »
0
That is a nice and clean looking install Curly!
Logged


Benjamin H

TravelingCarpenter

  • Crew
  • *
  • Posts: 76
  • Respect: +98
Re: Kato SD40 with Lok V5 kato replacement board
« Reply #2 on: May 30, 2022, 01:43:59 AM »
+1
BH,
    Thank you!  I need to focus on the layout now,, gotta a show coming up soon.

   TC
Logged

MK

  • Crew
  • *
  • Posts: 4069
  • Respect: +776
Re: Kato SD40 with Lok V5 kato replacement board
« Reply #3 on: May 30, 2022, 08:13:46 AM »
0
That looks painless!  Think this will work similar for a (Kato) SD40-2?
Logged

peteski

  • Crew
  • *
  • Posts: 32966
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +5345
    • Coming (not so) soon...
Re: Kato SD40 with Lok V5 kato replacement board
« Reply #4 on: May 30, 2022, 01:25:15 PM »
0
That does look like an easy install.  Well, the plug-n-play decoder sure makes this possible.

I'm curious why you decided to hard-wire the motor instead of using the original Kato metal contacts that the decoder was designed for?
Logged
. . . 42 . . .

TravelingCarpenter

  • Crew
  • *
  • Posts: 76
  • Respect: +98
Re: Kato SD40 with Lok V5 kato replacement board
« Reply #5 on: May 30, 2022, 05:29:23 PM »
0
Pete,
    I think a hard wire connection is better, why rely on a pressure contact when you can make a hard connection?
Plus I did not feel like messing with the tabs.

Thanks for the comments
TC
Logged

peteski

  • Crew
  • *
  • Posts: 32966
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +5345
    • Coming (not so) soon...
Re: Kato SD40 with Lok V5 kato replacement board
« Reply #6 on: May 30, 2022, 06:06:53 PM »
0
Quote from: TravelingCarpenter on May 30, 2022, 05:29:23 PM
Pete,
    I think a hard wire connection is better, why rely on a pressure contact when you can make a hard connection?
Plus I did not feel like messing with the tabs.

Thanks for the comments
TC

Thanks for the explanation.  Sounds reasonable
Looks like we belong to different schools of thoughts.  To me anything that is hard-wired makes future servicing more difficult.  I prefer using solderless connections whenever possible (without sacrificing reliability). Kato has been using those motor contacts for quite some time, and they seem to be quite reliable.  If I do a similar install, I'll likely use those original contacts.
Logged
. . . 42 . . .

TravelingCarpenter

  • Crew
  • *
  • Posts: 76
  • Respect: +98
Re: Kato SD40 with Lok V5 kato replacement board
« Reply #7 on: May 30, 2022, 09:23:16 PM »
0
Pete,
    I hear ya,, you make excellent points,, but you know a hat could cover those up!! I understand about the maintenance issue. It could be I just like using my Hakko rig. Lol
TC
Logged
Pages: [1]   Go Up
« previous next »