International S1700 truck

[John]

Test Print

Source files
https://www.tinkercad.com/things/lIFfKfopfUp-ho-scale-international-s-1700
https://www.tinkercad.com/things/gNHH1TxL6Rw-ho-scale-utility-bed-for-int-s1700



This started as an HO .stl ..

N Scale dimensions for the truck chassis    Cab Width 90" (14.72mm)  Length (37.8mm)  Height 12.60mm

I cut off the raft at the bottom of the original .. since when it's printed in N -- there isn't enough room to cleanly cut the body from the raft ..  I need to play with the supports to get it to print right ..

[Chris333]

When I need to cure the print before removing the supports I've been cutting them off with a jewelers saw and .009" blades.

[John]

When I need to cure the print before removing the supports I've been cutting them off with a jewelers saw and .009" blades.

I'll have to get one .. all I have is a fine tooth Xacto saw .. 

[SkipGear]

I'm a little more brute force...
Ultra thin diamond cut off wheel.

[Chris333]

I use those as well, but usually end up blowing my nose for the next hour.    and resin dust.

[SkipGear]

I use those as well, but usually end up blowing my nose for the next hour.    and resin dust.

If you are working with resin, or just living the the world as it is today, you should have plenty of mask options close by.

I hardly ever wore masks before all this, now I don't think twice about it, although I did have a nice respirator for painting.