Author Topic: NEW! Alco Hi-Ad Trucks from Cutting Edge Scale Models  (Read 2228 times)

0 Members and 1 Guest are viewing this topic.

dcutting

  • Crew
  • *
  • Posts: 359
  • Gender: Male
  • Respect: -57
NEW! Alco Hi-Ad Trucks from Cutting Edge Scale Models
« on: July 04, 2015, 07:27:51 PM »
0
Cutting Edge Scale Models is proud to present a brand-new product in both N and HO scales; the alco hi-ad (high adhesion) truck. This sideframe style was used on a small number of C415, C420, C425, and C430 locomotives, among others. Used in both freight and passenger service, this truck is truly versatile.

The N scale version (http://shpws.me/IRl5) features accurate geometry with 3-D spring detail and the curves of the prototype. Requires brake cylinders to complete.



See the full announcement at http://us11.campaign-archive1.com/?u=13db25d06b31a25d11e1dd452&id=12e47fbd4a&e=2d0e64c844

Best,
David
David Cutting

Mark5

  • Crew
  • *
  • Posts: 11030
  • Always with the negative waves Moriarty ...
  • Respect: +606
Re: NEW! Alco Hi-Ad Trucks from Cutting Edge Scale Models
« Reply #1 on: July 05, 2015, 12:03:45 PM »
0
Suggested source for brake cylinders?


central.vermont

  • Crew
  • *
  • Posts: 2623
  • Gender: Male
  • Jon
  • Respect: +147
Re: NEW! Alco Hi-Ad Trucks from Cutting Edge Scale Models
« Reply #2 on: July 05, 2015, 12:39:39 PM »
0
The only thing that comes to mind is Detail Associates #8025.

Jon

up1950s

  • Crew
  • *
  • Posts: 9751
  • Gender: Male
  • Respect: +2312
Re: NEW! Alco Hi-Ad Trucks from Cutting Edge Scale Models
« Reply #3 on: July 05, 2015, 06:23:10 PM »
0
How easily will these fit on Atlas C420s ?


Richie Dost

up1950s

  • Crew
  • *
  • Posts: 9751
  • Gender: Male
  • Respect: +2312
Re: NEW! Alco Hi-Ad Trucks from Cutting Edge Scale Models
« Reply #4 on: July 05, 2015, 06:27:56 PM »
0
« Last Edit: July 05, 2015, 06:52:42 PM by up1950s »


Richie Dost

central.vermont

  • Crew
  • *
  • Posts: 2623
  • Gender: Male
  • Jon
  • Respect: +147
Re: NEW! Alco Hi-Ad Trucks from Cutting Edge Scale Models
« Reply #5 on: July 05, 2015, 07:43:40 PM »
0
Yeah I should have said that they are for steam but it is the only thing I know of out there.

Jon

Spikre

  • Crew
  • *
  • Posts: 580
  • Respect: 0
Re: NEW! Alco Hi-Ad Trucks from Cutting Edge Scale Models
« Reply #6 on: July 05, 2015, 07:49:21 PM »
0
 :?
  possibly one late DL-440/T-6 had Hi-Ads ,look for pics of
  Mon-Con 400,it may have been built late 67,or early 68.
  Mon-Con C-415 did have Hi-Ads #701,blt about the same
  time frame as #-400.
  the last 2 T-6s were finished during 1/69,after the Alco Plant
  was officially closed,they had Roller Bearing Type "A" switcher
  trucks ,similar to trucks used since the late 30s on all but
  Alco Switchers.NSS  1016,1017.
  and 8 or so Baldwin switchers that used Standard Steel "Batz"
  trucks.circa 1939-41.
    Spikre
      :?
« Last Edit: July 05, 2015, 07:55:23 PM by Spikre »

dcutting

  • Crew
  • *
  • Posts: 359
  • Gender: Male
  • Respect: -57
Re: NEW! Alco Hi-Ad Trucks from Cutting Edge Scale Models
« Reply #7 on: July 06, 2015, 05:59:31 AM »
0
Suggested source for brake cylinders?

I think that I will add these to the N scale model, if not HO. These models were designed in HO scale, then modded for N.

How easily will these fit on Atlas C420s ?

I will make these so they are on a standard atlas frame to fit the AAR-B gear case.

-David
David Cutting

dcutting

  • Crew
  • *
  • Posts: 359
  • Gender: Male
  • Respect: -57
Re: NEW! Alco Hi-Ad Trucks from Cutting Edge Scale Models
« Reply #8 on: July 06, 2015, 09:04:12 AM »
0
Hello,

I just updated the N Scale version of the trucks with brake cylinders and a snap-fit onto atlas N scale AAR-B trucks. They are now available via shapeways: http://shpws.me/ISmc

-David
David Cutting

up1950s

  • Crew
  • *
  • Posts: 9751
  • Gender: Male
  • Respect: +2312
Re: NEW! Alco Hi-Ad Trucks from Cutting Edge Scale Models
« Reply #9 on: July 06, 2015, 03:55:46 PM »
0
Atlas compatible is terrific . Are the brake cylinders as flat as they show on your site ?


Richie Dost

dcutting

  • Crew
  • *
  • Posts: 359
  • Gender: Male
  • Respect: -57
Re: NEW! Alco Hi-Ad Trucks from Cutting Edge Scale Models
« Reply #10 on: July 06, 2015, 04:21:20 PM »
0
They are not flat, they need wire to represent the lever and air line.



-David
David Cutting

up1950s

  • Crew
  • *
  • Posts: 9751
  • Gender: Male
  • Respect: +2312
Re: NEW! Alco Hi-Ad Trucks from Cutting Edge Scale Models
« Reply #11 on: July 06, 2015, 06:03:08 PM »
0
Great , thank you .


Richie Dost