Author Topic: The Mill Loop  (Read 3574 times)

0 Members and 2 Guests are viewing this topic.

basementcalling

  • Crew
  • *
  • Posts: 3517
  • Gender: Male
  • Respect: +736
Re: The Mill Loop
« Reply #30 on: October 08, 2024, 01:21:45 AM »
0
I pulled the carpet in the train room. I also got some paint and the rest of the shelving that I needed to put up over the desk/workbench. I want to get that done before I assemble the benchwork.

We plan on putting new flooring in that room, actually all of the bedrooms.

This is what was under the carpet.




That would make laying out the trackplan on the floor easy.
Peter Pfotenhauer

nkalanaga

  • Crew
  • *
  • Posts: 9840
  • Respect: +1426
Re: The Mill Loop
« Reply #31 on: October 08, 2024, 02:17:00 AM »
0
For a permanent layout, if that flooring is in good condition, I'd just keep it.
N Kalanaga
Be well

Tad_T

  • Crew
  • *
  • Posts: 166
  • Gender: Male
  • Respect: +61
Re: The Mill Loop
« Reply #32 on: October 08, 2024, 11:58:58 AM »
0
That would make laying out the trackplan on the floor easy.

It would, wouldn’t it.

For a permanent layout, if that flooring is in good condition, I'd just keep it.

It’s not. It’s good enough to lay another floor over it.

Thanks,
Tad

The “All Day & Night” Railway Company

wm3798

  • Crew
  • *
  • Posts: 16097
  • Gender: Male
  • I like models. She likes antiques. Perfect!
  • Respect: +6371
    • Western Maryland Railway Western Lines
Re: The Mill Loop
« Reply #33 on: October 08, 2024, 12:34:47 PM »
0
Depending on its age it might be asbestos tile.  Best to cover it up.
Is it some sort of sheet flooring or individual tiles?  Individual tiles would almost certainly be asbestos, again, depending on the age (pre 1970 ish)

Lee
Rockin' It Old School

Lee Weldon www.wmrywesternlines.net

Van Horne

  • Crew
  • *
  • Posts: 165
  • Respect: +24
Re: The Mill Loop
« Reply #34 on: October 08, 2024, 02:13:06 PM »
0
That was my first thought too when I saw that picture. I'd bet dollars to doughnuts that those are asbestos tiles!

Dave

Tad_T

  • Crew
  • *
  • Posts: 166
  • Gender: Male
  • Respect: +61
Re: The Mill Loop
« Reply #35 on: October 08, 2024, 04:30:30 PM »
0
Depending on its age it might be asbestos tile.  Best to cover it up.
Is it some sort of sheet flooring or individual tiles?  Individual tiles would almost certainly be asbestos, again, depending on the age (pre 1970 ish)

Lee

That was my first thought too when I saw that picture. I'd bet dollars to doughnuts that those are asbestos tiles!

Dave

They’re individual tiles. I was thinking asbestos, as well.

That part of the house was originally built in 1962. I’m not sure when the tiles were put in.
Tad

The “All Day & Night” Railway Company

Steveruger45

  • Crew
  • *
  • Posts: 1710
  • Gender: Male
  • Respect: +527
Re: The Mill Loop
« Reply #36 on: October 08, 2024, 06:01:17 PM »
0
They’re individual tiles. I was thinking asbestos, as well.

That part of the house was originally built in 1962. I’m not sure when the tiles were put in.


I was wondering on asbestos tiles too. FWIW, I’ve seen it on shows like This Old House and such that if the tile size is 9” square and made in the 60’s / 70’s it is pretty much a given to contain asbestos.
Steve

Tad_T

  • Crew
  • *
  • Posts: 166
  • Gender: Male
  • Respect: +61
Re: The Mill Loop
« Reply #37 on: October 10, 2024, 09:09:03 PM »
0
Three rooms worth of flooring.



Tad

The “All Day & Night” Railway Company

Narlie

  • Crew
  • *
  • Posts: 96
  • Gender: Male
  • Respect: +16
Re: The Mill Loop
« Reply #38 on: October 11, 2024, 03:34:48 PM »
0
They’re individual tiles. I was thinking asbestos, as well.

That part of the house was originally built in 1962. I’m not sure when the tiles were put in.
From the land of Asbestos!
Maybe you can just apply your floating floor over them if they are solid and not flaking.
Can you or should you take them out?
Are there any local laws regarding handling and declaring them?
When it comes time to sell the house, will this compromise the sale?
Just my thoughts.

Narlie

  • Crew
  • *
  • Posts: 96
  • Gender: Male
  • Respect: +16
Re: The Mill Loop
« Reply #39 on: October 11, 2024, 03:39:41 PM »
+1
Check out this site they seem to give some good info on Asbestos tiles.
https://www.bobvila.com/articles/asbestos-floor-tiles/

Good luck on your project.

Dave B ;)

MVW

  • Crew
  • *
  • Posts: 1452
  • Respect: +359
Re: The Mill Loop
« Reply #40 on: October 11, 2024, 09:37:45 PM »
+1
Faced a similar issue. (I'm no expert, and my memory ain't what it used to be -- I think.) But it seems to me the recommended practice is to leave asbestos tile in place and cover them. Removal would require a specialist. We put a floating tile floor over a kitchen and bathroom. No problem. But by no means should you take my word for it.

Jim

Tad_T

  • Crew
  • *
  • Posts: 166
  • Gender: Male
  • Respect: +61
Re: The Mill Loop
« Reply #41 on: October 12, 2024, 10:01:11 AM »
0
From the land of Asbestos!
Maybe you can just apply your floating floor over them if they are solid and not flaking.
Can you or should you take them out?
Are there any local laws regarding handling and declaring them?
When it comes time to sell the house, will this compromise the sale?
Just my thoughts.

Faced a similar issue. (I'm no expert, and my memory ain't what it used to be -- I think.) But it seems to me the recommended practice is to leave asbestos tile in place and cover them. Removal would require a specialist. We put a floating tile floor over a kitchen and bathroom. No problem. But by no means should you take my word for it.

Jim

When you break it up trying to remove it is when it becomes a problem. In Louisiana you can do this yourself in a residence, but you are supposed to follow a bunch of procedures to abate risk. Then you have to go through all kinds of stuff to legally dispose of it.

The flooring is all intact. I’m going to do what the EPA and the Louisiana DEQ call “manage in place.” I’m going to lay the new floating floor over it so that the tiles do not become damaged.
Tad

The “All Day & Night” Railway Company

Tad_T

  • Crew
  • *
  • Posts: 166
  • Gender: Male
  • Respect: +61
Re: The Mill Loop
« Reply #42 on: October 13, 2024, 07:53:11 PM »
+2
Made some progress on the room.

Finished the painting and trimming.




New outlets, light switch, ceiling fan.





Got started on laying flooring this evening.






Tad

The “All Day & Night” Railway Company

Tad_T

  • Crew
  • *
  • Posts: 166
  • Gender: Male
  • Respect: +61
Re: The Mill Loop
« Reply #43 on: Yesterday at 08:20:35 PM »
0
A little more progress.









Tad

The “All Day & Night” Railway Company