Author Topic: Small logging layout .  (Read 5937 times)

0 Members and 1 Guest are viewing this topic.

randgust

  • Crew
  • *
  • Posts: 2758
  • Respect: +2261
    • Randgust N Scale Kits
Re: Small logging layout .
« Reply #45 on: August 13, 2024, 09:57:31 AM »
0
I've spent time in Louisiana west of New Orleans at Garyville, LA - now a major chemical and plastics center but also home to one of the biggest historic cypress sawmills in the state, with it's own logging railroad.   Mill office, log pond, etc. still intact and a museum being developed.

But one thing you don't have down there are any grades!!!!   But there were alligators in the old log pond....

https://www.facebook.com/GaryvilleTimbermillMuseum/
« Last Edit: August 13, 2024, 09:59:26 AM by randgust »

randgust

  • Crew
  • *
  • Posts: 2758
  • Respect: +2261
    • Randgust N Scale Kits
Re: Small logging layout .
« Reply #46 on: August 21, 2024, 08:36:25 AM »
+3
After about a weeks work on fixing various 'glitches' and making what seemed like 1000 trees, both the original Hickory Valley and newer Ross Run logging modules are 'done', tested, and 'finished' and ready for Altoona.  (Hey Chris333, it's finally 'done'.)

Most have held up pretty well, a broken wire, beat-up scenery, and one burned out Tortoise machine, all good.  My 1976 engineering has held up, if I can remember why I did it the way I did....

I'd always designed both modules to be very flexible with connection tracks to the outside world.  Ttrak didn't exist when I started these, and I just went back and replaced all the 'off-module' track connections with T-track style track joints.  It's a lot easier to just click those together than set in rail joiners with a pair of tweezers.

At some point these modules were ultimately designed to interface with the "Big" T-trak layout via the original West Hickory module, that brings a track out 90-degrees over a diamond and across the Allegheny river, another module that's already done (Hickory Bridge).  So, finally, the ultimate design plan here is 'almost' done.

I will credit Altoona as a motivational factor, every year there's been at least one module literally rushed to completion to make the show.

metalworkertom

  • Crew
  • *
  • Posts: 205
  • Respect: +68
Re: Small logging layout .
« Reply #47 on: August 23, 2024, 03:13:45 PM »
+1
You are moving right along .
Hopefully they will be able to get the museum up and running. Seems like I remember another one in development a little further North. I'm going to use some things that Louisiana Cypress Lumber did . But not following anything to detailed as far as terrain goes.  Mainly want it interesting.  Maybe one area with flooded tracks and the required Gator . Louisiana Cypress used tank cars behind there engines for a clean water source for the engines , you just can't filter swamp water very effectively.


randgust

  • Crew
  • *
  • Posts: 2758
  • Respect: +2261
    • Randgust N Scale Kits
Re: Small logging layout .
« Reply #48 on: October 11, 2024, 11:08:25 AM »
+4
OK, so by the time I got it to Altoona, here's the way it looked, paired up with the original Hickory Valley layout:



link:  http://www.randgust.com/Ross%20Run%20Module%201%20sm.jpg



link:  http://www.randgust.com/Ross%20Run%20Module%202%20sm.jpg

And what I was really after here, with a little Photoshop help on de-saturation:



Link:  http://www.randgust.com/Ross%20Run%20Logging%201%20BW%20sm.jpg

metalworkertom

  • Crew
  • *
  • Posts: 205
  • Respect: +68
Re: Small logging layout .
« Reply #49 on: October 11, 2024, 04:54:47 PM »
0
Looks great Randy .
I have gotten my base painted . Not sure if I want to put down any cork or not .