0 Members and 2 Guests are viewing this topic.
Pete - thanks for chiming in. I mentioned above that I have not tried auto-tune. The reason is that I found posts on the ESU io.group where auto-tune attempts on coreless motors either didn’t even make the loco move, or, made the performance even worse. I don’t have ESU’s tester (I have a home-made one). I hope to fire up LokProgrammer later today, and will report back.
I have a number of N scale locos with my own ESU installs and, while I love the decoders, I have been less than impressed with the auto-tune feature.
Dwight,In the motor settings page in Lokprogrammer toward the bottom is a text line for settings using selected motor types. At the bottom of that list is coreless motors with small diameter. Writing that will get you in the ballpark then go from there and compare that to the values you posted above.Jim