Author Topic: Genesee & Wyoming Railroad Services Inc. to Address Clean Air Act Violations  (Read 553 times)

0 Members and 1 Guest are viewing this topic.

Ntrainz1

  • Crew
  • *
  • Posts: 333
  • Gender: Male
  • Respect: +91
    • blog
"To mitigate excess pollutants associated with the alleged violations, the settlement requires GWRSI to remove from service and permanently destroy 88 older locomotives that are not required to meet any EPA emission standards."

https://www.epa.gov/newsreleases/genesee-wyoming-railroad-services-inc-address-clean-air-act-violations-settlement

https://www.justice.gov/opa/press-release/file/1563686/download

sirenwerks

  • Crew
  • *
  • Posts: 5847
  • Gender: Male
  • Respect: +380
"To mitigate excess pollutants associated with the alleged violations, the settlement requires GWRSI to remove from service and permanently destroy 88 older locomotives that are not required to meet any EPA emission standards."

https://www.epa.gov/newsreleases/genesee-wyoming-railroad-services-inc-address-clean-air-act-violations-settlement

https://www.justice.gov/opa/press-release/file/1563686/download


Zoinks! Maybe the G&W will get rid of its pollutant paint scheme too.  :trollface:
Failing to prepare is preparing to fail.

Hawghead

  • Crew
  • *
  • Posts: 791
  • Gender: Male
  • Respect: +325
When I first started running we were still using SD-40s for road power for some trains between Portland and Hinkle, as that was the only place they could be used because of their emissions, I sure miss those motors.

Scott
There's a prototype for everything.
If you can't make it perfect, make it adjustable.
DCC is not plug-n-play.