Author Topic: Best Of My Children have gone into the world (sniff, sniff) - Bearden Models  (Read 12600 times)

0 Members and 2 Guests are viewing this topic.

u18b

  • Crew
  • *
  • Posts: 3707
  • Respect: +1954
    • My website
Re: My Children have gone into the world (sniff, sniff) - Bearden Models
« Reply #75 on: March 28, 2020, 10:17:57 PM »
+1
Amazingly, I discovered two more of my children that have gone out into the world.

First, I have no photographic record.  But I took a Con Cor/Kato U50 and repowered it with a better motor and with flywheels- back when flywheels were only just getting going good in N scale.



And then I came across this:  a superdetailed E8 or E9 (can't remember).
This was from Kato's first run.  It's possible this was a custom number-  I can't recall.



Completed numberboards, added wire grabs, wipers, beacon....



And even a double beam headlight (I had forgotten until I saw this photo).
I think I could render that better today, but it looked pretty cool when running back then.


I still have hopes of getting a photo of one more of my children since I know who has it.

 ;)



Ron Bearden
CSX N scale Archivist
http://u18b.com

"All get what they want-- not all like what they get."  Aslan the Lion in the Chronicles of Narnia by C.S.Lewis.

CRL

  • Crew
  • *
  • Posts: 2332
  • Needs More Dirt.
  • Respect: +636
Re: My Children have gone into the world (sniff, sniff) - Bearden Models
« Reply #76 on: March 28, 2020, 10:30:12 PM »
+1
At least they’re not showing up at your doorstep with a couple of unknown grandchildren in tow.  :trollface:

nkalanaga

  • Crew
  • *
  • Posts: 9893
  • Respect: +1444
Re: My Children have gone into the world (sniff, sniff) - Bearden Models
« Reply #77 on: March 29, 2020, 12:27:41 AM »
0
What would the offspring of an E8 and a U50 look like?  A couple might be interesting.
N Kalanaga
Be well

wm3798

  • Crew
  • *
  • Posts: 16124
  • Gender: Male
  • I like models. She likes antiques. Perfect!
  • Respect: +6467
    • Western Maryland Railway Western Lines
Re: My Children have gone into the world (sniff, sniff) - Bearden Models
« Reply #78 on: March 29, 2020, 10:39:10 AM »
+1
I photographed all the locomotives I put decoders in for people over the years, that might make an interesting album...  I should have shot the innards to show how I did each one, but that was a trade secret at the time!

I equate this thread to my work in construction...  It's nice to reflect on the work you've done and know that people are enjoying the results well after completion.

Lee
Rockin' It Old School

Lee Weldon www.wmrywesternlines.net

C855B

  • Crew
  • *
  • Posts: 10861
  • Respect: +2416
Re: My Children have gone into the world (sniff, sniff) - Bearden Models
« Reply #79 on: March 29, 2020, 10:42:21 AM »
+1
What would the offspring of an E8 and a U50 look like?  A couple might be interesting.

Uh... the first generation GE turbines.   :facepalm:  :D
...mike

http://www.gibboncozadandwestern.com

Note: Images linked in my postings are on an HTTP server, not HTTPS. Enable "mixed content" in your browser to view.

There are over 1000 images on this server. Not changing anytime soon.

FlyGuyB

  • Crew
  • *
  • Posts: 26
  • Respect: +3
Re: My Children have gone into the world (sniff, sniff) - Bearden Models
« Reply #80 on: March 29, 2020, 12:07:26 PM »
0
Greetings Ron, I'm blown away by how extensive your work actually is. It's an honor to have had your skilled hands work on some of my models. I'm sure N scalers across the globe salute you for your groundbreaking work! God bless, and when you're finished with the EP's and your workbench is free drop me a line! Outstanding!

peteski

  • Crew
  • *
  • Posts: 32934
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +5334
    • Coming (not so) soon...
Re: My Children have gone into the world (sniff, sniff) - Bearden Models
« Reply #81 on: March 29, 2020, 01:54:38 PM »
0
Greetings Ron, I'm blown away by how extensive your work actually is. It's an honor to have had your skilled hands work on some of my models. I'm sure N scalers across the globe salute you for your groundbreaking work! God bless, and when you're finished with the EP's and your workbench is free drop me a line! Outstanding!

Have you seen Ron's original EP-2 build thread here?  It is like a (very good) novel.  Very long, and fascinating!

https://www.therailwire.net/forum/index.php?topic=31042.0
. . . 42 . . .

u18b

  • Crew
  • *
  • Posts: 3707
  • Respect: +1954
    • My website
Re: My Children have gone into the world (sniff, sniff) - Bearden Models
« Reply #82 on: March 29, 2020, 09:50:19 PM »
+1
I was sent the following message from Jerry and have his permission to share it here....
I'll answer here since this thread is about my models (and hence me)...

Quote
Looking at your missing models makes me wonder how you are able to keep track of them with with photos and documentation.
How in the world are you able to write so much valuable information about the articles you have given us.
I know this is a daunting task.
I tried to write a how to do thing on installing a DCC sound decoder into a brass steam locomotive.
I gave up! I would be working along and then realize I did not photograph a step or two.
I soon gave up- not my thing I guess.
I can do the install but keeping up with the photos and documentation is beyond me.
Thanks for all that you do for the N scale world.

Actually, it is daunting at times.

And as you can see, I have several models in this thread that I do NOT have photos for.  Most of those are from the time period when I was about 28-31 years old.  After that, I took more photos.

There are several things that work in my favor.

1.  Digital photography/computers.   When I first became active in writing articles in the late 80s and 90s, there was a time when my old style photography bill was $700/year (I remember from doing my taxes!).  It's really hard to do film photography while you're doing a project because you don't know how well a shot turned out.   

But Digital is GREAT.  So when I model, and think I want to document something, I have my camera right there.  And I can see right then if the shot is OK.

On the EP-2 thread that Pete referenced, I posted something like 1,000 photographs in that build- and that's only the ones I posted.   I could not have done that with film.

2.  I'm a public speaker by trade and my PhD is in communication.  So you might say that God wired me for stuff like this.  When I was 24 and worked at Sears, I wrote a short operations manual for our department because we didn't have one and I got tired of always asking questions.

So my brain is wired for logical steps, planning in communicating- even story telling.

3.  I love what I do with modeling.  And I keep a folder on my computer of article ideas.   So in reality, many articles are taking shape before I even start a project.   Only rarely do I complete a project and say-- that would make a good article.

I just checked my ideas folder.  There are 25 active folders that already have something for an article.  Prototype research.  A plan.  Something.  A few are almost finished.  All could be finished if I put my mind and time to them.  I have them ranked as to how close I am to finishing.  Most will never be submitted, but the ideas are there.    And if they sit long enough- they become unusable- so I actually have a folder called "Procrastination Death"    :facepalm:

Then I have 91 more folders that are just ideas (I just counted them).  Most will never even be modeled.    But I see something and make a folder.  On a few, I actually started writing.

Like this folder- BSA GEVO.  I'm an Eagle Scout and so I was intrigued when Union Pacific painted a GEVO in boy scout rank badges. 
https://www.flickr.com/photos/knelson27/4966283721
I doubt I would ever make that locomotive-  but who knows, I might.

Here's another I will probably never do:  Folder is called GM&N Rebel 1934 Trainset.  Inside are 12 photos off the web as preliminary research and a document with one paragraph of notes.  Here is a very rare color photo:  https://farm8.staticflickr.com/7119/7072853649_63a6350ae2.jpg

Aaron-  Chessie System Fan will tell you that what often happens is that some inspiration will come over me and I'll just do something.
(that hasn't happened very much in a while because life challenges and the major EP-2 project have slowed me down- the WM Shay thread was a recent example).

But even still, new articles come along.   I wrote one last week when the editor of The N Scale Enthusiast asked me to write something on my WM Shay project.  The article is now written.   But now I need to paint one for the article!   So modeling and photography await- the writing is finished.

Aaron and I already have a complete layout planned in a different scale (T gage).   We have photographs, satellite screen grabs, track plans etc (sorry I can't tell you about it because I don't want someone to steal the idea!   :trollface:  ).  Maybe we will build it one day!   If I don't build it, he could.  DKS and Mark inspired me... but then T sort of died.    But if it ever moves forward (and I have time), I already have an idea!

4.  Since I probably already KNOW I'm going to be writing and article on a xxx subject, then I have kept a notebook on my modeling desk and keep notes as I work.  It makes the writing go a lot better since I might forget a step otherwise.  Now I do it with a computer.  What I do to the EP-2 is so complex (over 100 individual steps) that there is no way I could do it without computer notes.

Long answer.
Hope it helps with your question.   ;)
 


« Last Edit: March 30, 2020, 12:39:50 AM by u18b »
Ron Bearden
CSX N scale Archivist
http://u18b.com

"All get what they want-- not all like what they get."  Aslan the Lion in the Chronicles of Narnia by C.S.Lewis.

peteski

  • Crew
  • *
  • Posts: 32934
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +5334
    • Coming (not so) soon...
Re: My Children have gone into the world (sniff, sniff) - Bearden Models
« Reply #83 on: March 29, 2020, 11:07:08 PM »
0
Thanks for the peek inside your mind Ron - fascinating!  I can relate to many things you do, but I'm not quite as prolific or fastidiously track my projects as you do.  I also have a bunch of half-finished half-documented projects and a whole bunch of ideas for future projects I will probably never actually start.
. . . 42 . . .

woodone

  • Crew
  • *
  • Posts: 799
  • Gender: Male
  • Respect: +33
Re: My Children have gone into the world (sniff, sniff) - Bearden Models
« Reply #84 on: March 30, 2020, 05:56:27 PM »
0
Thanks Ron, but I still say WOW!
Jerry AKA woodone

u18b

  • Crew
  • *
  • Posts: 3707
  • Respect: +1954
    • My website
Re: My Children have gone into the world (sniff, sniff) - Bearden Models
« Reply #85 on: December 31, 2022, 10:02:40 PM »
+2
This is the latest child to go into the world.



More photos here.
https://www.therailwire.net/forum/index.php?topic=55251.0
Ron Bearden
CSX N scale Archivist
http://u18b.com

"All get what they want-- not all like what they get."  Aslan the Lion in the Chronicles of Narnia by C.S.Lewis.

u18b

  • Crew
  • *
  • Posts: 3707
  • Respect: +1954
    • My website
Re: My Children have gone into the world (sniff, sniff) - Bearden Models
« Reply #86 on: December 31, 2022, 10:05:32 PM »
+8

We celebrated Christmas today.

Chessie System Fan surprised the socks off of me.  He located and acquired my very first kitbash!  A U18B.   And gave it to me for Christmas.



So here is another child that came home!  The handrails were in pretty bad shape, but I salvaged them.

It is a real hodge-podge.  The mechanism is an Atlas/Kato RS-3.   The shell started out life as a Bachmann U36B.  I cut the wings off, cut the center section out of the body and improved the side sill.   The fuel tank is a cut down Trix U28C tank.  The brakewheel is from an RS-3 and the horn from a Kato GP38-2.

I made this in 1988 in my late 20s.   This loco was my first kitbash and my second attempt at fine wire handrails and grabirons.




Aaron asked me why the pilot was open.  I said all commercial locos were open back then.  MicroTrains was only just coming out with pilot adapters about this time period.





The year I built this kitbash, the RS-1 and U25B came out with flywheels.    So I went back and added flywheels to my mechanism.  I oiled it up and it runs surprisingly well for such an old loco.



Now proudly in a spot in my display case.   Many times I have thought- I wish I had that loco back.

Thanks Aaron!


Ron Bearden
CSX N scale Archivist
http://u18b.com

"All get what they want-- not all like what they get."  Aslan the Lion in the Chronicles of Narnia by C.S.Lewis.

peteski

  • Crew
  • *
  • Posts: 32934
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +5334
    • Coming (not so) soon...
Re: My Children have gone into the world (sniff, sniff) - Bearden Models
« Reply #87 on: December 31, 2022, 10:29:28 PM »
0
What a story!
Reunited after all those years . . .  (Sounds like a song).   :D
. . . 42 . . .

nkalanaga

  • Crew
  • *
  • Posts: 9893
  • Respect: +1444
Re: My Children have gone into the world (sniff, sniff) - Bearden Models
« Reply #88 on: January 01, 2023, 02:11:54 AM »
+1
It's very hard to do prototypical solid pilots with truck-mounted couplers.  Truck-mounted pilots look even worse! 

Except for those locos that actually HAD truck-mounted pilots, of course.
N Kalanaga
Be well

Hoghead

  • Posts: 1
  • Respect: 0
Re: My Children have gone into the world (sniff, sniff) - Bearden Models
« Reply #89 on: January 02, 2023, 02:57:57 PM »
0
Wow, such an amazing portfolio! Are you still improving the EP2's ?