Corner Clamps

[CBQ Fan]

Anyone have a recommendation for a readily available corner clamps for holding walls together at 90 degree angles so you can glue them?

[peteski]

IIRC, Micro-Mark sells these. Then there are the magnetic tables with bunch of magnets you can arrange for gluing walls at right angles.

[MichaelWinicki]

IIRC, Micro-Mark sells these. Then there are the magnetic tables with bunch of magnets you can arrange for gluing walls at right angles.

I own one... Highly recommended!

[wazzou]

Then there are the magnetic tables with bunch of magnets you can arrange for gluing walls at right angles.

I've got one of those and use it pretty frequently.  I had always thought I'd get around to building some of those "Right Clamps" but haven't. 
I think they are expensive and can be cloned cheaper, but not if you don't get around to it.

[Dave Schneider]

I've got one of those and use it pretty frequently.  I had always thought I'd get around to building some of those "Right Clamps" but haven't. 
I think they are expensive and can be cloned cheaper, but not if you don't get around to it.

Too funny. I have purchased the parts to do this a couple of times and have lost them over the years before actually cloning them....ugh.

Best wishes, Dave

[SandyEggoJake]

Get em straight from Randy - the guy who makes them.

Updated: website.

https://www.coffmaneng.com/product-page/mini-right-clamp

[SandyEggoJake]

Recently started to make my own modified version of the Coffman right angle clamps, specifically designed for N scale car.  After some false starts, I think I've hit on a winner.  Will post photos and a parts list later.

[narrowminded]

I have used 3-2-1 blocks with some neodymium magnets with success.  Any square steel should work as well.