« previous next »
Pages: [1] 2 3   Go Down

Author Topic: N SW1001 Now Available From CESM  (Read 4695 times)

0 Members and 1 Guest are viewing this topic.

dcutting

  • Crew
  • *
  • Posts: 359
  • Gender: Male
  • Respect: -57
N SW1001 Now Available From CESM
« on: June 10, 2016, 11:12:09 PM »
+2
Hi Everyone,

The SW1001 from CESM is here!

https://www.shapeways.com/product/7CRKRTKDD/emd-sw1001-shell-n-scale
http://cescalemodels.com/collections/n-emd-sw1001/products/n-sw1001-detail-parts
http://cescalemodels.com/collections/n-emd-sw1001/products/n-sw1001-windows

This shell is an accurate representation of the EMD SW1001 in N Scale. It is a direct replacement for the Kato NW2 shell with no modifications necessary. You will need:


1x Shell
1x Detail Parts Set from here
Horn of your Choice
Bell of your choice
Grab Irons
.008" Phosphor-Bronze Wire


This kit includes parts to construct versions with drop-steps on their pilots (Conrail, etc.), or without (LIRR, etc.)

-David
Logged
David Cutting

Joetrain59

  • Crew
  • *
  • Posts: 1600
  • Gender: Male
  • Respect: +75
Re: N SW1001 Now Available From CESM
« Reply #1 on: June 10, 2016, 11:24:26 PM »
-7
June 10, 2016, 11:24:26 PM - Hidden.
Logged

coosvalley

  • Crew
  • *
  • Posts: 1405
  • Respect: +640
Re: N SW1001 Now Available From CESM
« Reply #2 on: June 11, 2016, 01:01:56 AM »
+2
Quote from: Joetrain59 on June 10, 2016, 11:24:26 PM
Make it fit the Bmann NW2.
 Joe D

Jeeze, not even a please?
Logged

Joetrain59

  • Crew
  • *
  • Posts: 1600
  • Gender: Male
  • Respect: +75
Re: N SW1001 Now Available From CESM
« Reply #3 on: June 11, 2016, 02:26:44 AM »
0
Quote from: coosvalley on June 11, 2016, 01:01:56 AM
Jeeze, not even a please?
You're a poet, and don't even know it. LOL

 Ok, maybe I should have said please. But we all know the Kato mech is questionable, and certainly not as smooth as the Bmann mech.
 Joe D
Logged

mecgp7

  • Crew
  • *
  • Posts: 724
  • Respect: +275
Re: N SW1001 Now Available From CESM
« Reply #4 on: June 11, 2016, 05:27:49 AM »
0
Nice job bringing another loco option into the line up. Will your handrail kit fit the stock LL SW units?
Logged

crappie

  • Crew
  • *
  • Posts: 59
  • Respect: +4
Re: N SW1001 Now Available From CESM
« Reply #5 on: June 11, 2016, 06:38:17 AM »
0

 yes make it fit BMann, better engine
Logged

dcutting

  • Crew
  • *
  • Posts: 359
  • Gender: Male
  • Respect: -57
Re: N SW1001 Now Available From CESM
« Reply #6 on: June 11, 2016, 08:16:54 AM »
0
Quote from: mecgp7 on June 11, 2016, 05:27:49 AM
Nice job bringing another loco option into the line up. Will your handrail kit fit the stock LL SW units?

Not sure.

Quote from: Joetrain59 on June 10, 2016, 11:24:26 PM
Make it fit the Bmann NW2.
 Joe D

I don't have a bachmann NW2. Is the mechanism the same width as the Kato unit? If so, you can probably manage to fit it. Modifications to the hood width at this point are near impossible.
Logged
David Cutting

MichaelWinicki

  • Crew
  • *
  • Posts: 2096
  • Respect: +335
Re: N SW1001 Now Available From CESM
« Reply #7 on: June 11, 2016, 08:25:54 AM »
+2
I applaud the effort!

The mind reels at the different loco models that could be created this way– That are not currently available.

Again props to you dcutting for bringing this to market.
Logged

nscaler711

  • Crew
  • *
  • Posts: 834
  • Gender: Male
  • @frs_strelizia
  • Respect: +221
    • IG
Re: N SW1001 Now Available From CESM
« Reply #8 on: June 11, 2016, 10:20:07 AM »
+1
What the hell did I just read?!?
People saying something nice about Bachmann??
And that its better than Kato???
On The Railwire???
Am I dead?
What is even real?
Does not Compute!!
*brain sizzles*
Logged
“If you have anything you wanna say, you better spit it out while you can. Because you’re all going to die sooner or later." - Zero Two

Missaberoad

  • Crew
  • *
  • Posts: 3626
  • Gender: Male
  • Ryan in Alberta
  • Respect: +1218
Re: N SW1001 Now Available From CESM
« Reply #9 on: June 11, 2016, 10:25:51 AM »
+1
Not sure what everyone is talking about. My Kato nw2 runs beautifully and the mechanism is typical Kato quality.  :P
Logged
Quote from: DirtyD79 on January 21, 2024, 12:21:37 PM
The Railwire is not your personal army.  :trollface:

cjm413

  • Crew
  • *
  • Posts: 1489
  • Respect: +149
Re: N SW1001 Now Available From CESM
« Reply #10 on: June 11, 2016, 01:10:42 PM »
0
Why not the MTL SW1500 chassis?   It's the only one that comes with roller bearing equipped AAR-A trucks...
Logged

peteski

  • Crew
  • *
  • Posts: 33394
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +5584
    • Coming (not so) soon...
Re: N SW1001 Now Available From CESM
« Reply #11 on: June 11, 2016, 01:13:35 PM »
+1
Quote from: Joetrain59 on June 11, 2016, 02:26:44 AM
You're a poet, and don't even know it. LOL
But we all know the Kato mech is questionable, and certainly not as smooth as the Bmann mech.
 Joe D

Now that is one of the funniest tings I've ever heard on TRW!  You're joking, right?

Few people reported slipping gear on the Kato units, but overall, I would say it is like a Bentley compared to a Chevy.  No comparison, really.
Logged
. . . 42 . . .

sirenwerks

  • Crew
  • *
  • Posts: 5871
  • Gender: Male
  • Respect: +396
Re: N SW1001 Now Available From CESM
« Reply #12 on: June 11, 2016, 02:00:53 PM »
+2
OMG people. Can anyone say gift horse?
Logged
Failing to prepare is preparing to fail.

coosvalley

  • Crew
  • *
  • Posts: 1405
  • Respect: +640
Re: N SW1001 Now Available From CESM
« Reply #13 on: June 11, 2016, 02:08:40 PM »
+1
Quote from: sirenwerks on June 11, 2016, 02:00:53 PM
OMG people. Can anyone say gift horse?

+1...... I know right?

You guys could always buy one and see if it fits,and then show us the results! :trollface:
Logged

dcutting

  • Crew
  • *
  • Posts: 359
  • Gender: Male
  • Respect: -57
Re: N SW1001 Now Available From CESM
« Reply #14 on: June 11, 2016, 07:53:45 PM »
+1
Quote from: cjm413 on June 11, 2016, 01:10:42 PM
Why not the MTL SW1500 chassis?   It's the only one that comes with roller bearing equipped AAR-A trucks...

The SW1500 had a much higher deck than the SW1001, plus the mechanism requires pickup pads to be mounted to the shell... not fun.
Logged
David Cutting
Pages: [1] 2 3   Go Up
« previous next »