Author Topic: 2016 Amherst Railroad Show Report  (Read 10230 times)

0 Members and 1 Guest are viewing this topic.

Ed Kapuscinski

  • Global Moderator
  • Crew
  • *
  • Posts: 24738
  • Head Kino
  • Respect: +9249
    • Conrail 1285
Re: 2016 Amherst Railroad Show Report
« Reply #30 on: January 30, 2016, 08:08:17 PM »
0
Those SD40-2s can't keep a hand rail intact can they?

I'm just glad there's not a giant crater in the roof!

Dave V

  • Crew
  • *
  • Posts: 11222
  • Gender: Male
  • Foothills Farm Studios -- Dave's Model Railroading
  • Respect: +9332
Re: 2016 Amherst Railroad Show Report
« Reply #31 on: January 30, 2016, 08:29:06 PM »
0
I hope the production M1s don't have crooked keystones...!   :scared:

garethashenden

  • Crew
  • *
  • Posts: 1929
  • Respect: +1339
Re: 2016 Amherst Railroad Show Report
« Reply #32 on: January 30, 2016, 08:41:07 PM »
+1
I hope the production M1s don't have crooked keystones...!   :scared:

That's awfully picky of you.  :trollface:

I should have photographed the front of the other one, I can't remember what it looked like. There were a bunch of people around BLI, so I just grabbed a couple pictures and left.

unittrain

  • Crew
  • *
  • Posts: 1492
  • Respect: +147
Re: 2016 Amherst Railroad Show Report
« Reply #33 on: January 30, 2016, 09:43:13 PM »
0
U30c next.

Not here.
Arnold's doing a U30C?  Duplicating Kato  :facepalm: I hope it's a different U-boat like a U30b or do you mean the U28c is next.
« Last Edit: January 30, 2016, 10:52:22 PM by unittrain »

daniel_leavitt2000

  • Crew
  • *
  • Posts: 6345
  • Respect: +1298
Re: 2016 Amherst Railroad Show Report
« Reply #34 on: January 30, 2016, 11:06:28 PM »
0
I think Kato is of a very late U30C. Earlier units would look like a late model U28C, in which case they would be covering the entire line. I have to ask Atlas if they are planning on making the previously mentioned U33/36B from HO to N.

On the Intermountain SD40-2. It was delayed so that they could adapt some tooling and improvements. The walkways are now one piece instead of the Kato like version with lift off tread sections on the front and rear platforms. The chassis will be all new with a sound box in the fuel tank. Looks like a nice place to put a tungsten slug. Finally, the engines were absolutely man handled. These are not display items like Atlas, Bachmann or Kato does. Nope, they are out on the table to touch inspect and tear the shells off to see the chassis. The handrails are sampling plastic which is meant to be more forgiving when coming from the machine. I'll give them a pass.

Oh and that's a confirmed NO on the flexcoil trucks. Too fee orders to justify the tooling of a single road specific detail. I know, I know...
There's a shyness found in reason
Apprehensive influence swallow away
You seem to feel abysmal take it
Then you're careful grace for sure
Kinda like the way you're breathing
Kinda like the way you keep looking away

daniel_leavitt2000

  • Crew
  • *
  • Posts: 6345
  • Respect: +1298
Re: 2016 Amherst Railroad Show Report
« Reply #35 on: January 30, 2016, 11:11:32 PM »
+3
Oh, here is my table...
[ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ]
There's a shyness found in reason
Apprehensive influence swallow away
You seem to feel abysmal take it
Then you're careful grace for sure
Kinda like the way you're breathing
Kinda like the way you keep looking away

Mark5

  • Crew
  • *
  • Posts: 11029
  • Always with the negative waves Moriarty ...
  • Respect: +605
Re: 2016 Amherst Railroad Show Report
« Reply #36 on: January 30, 2016, 11:40:15 PM »
0
Arnold's doing a U30C?  Duplicating Kato  :facepalm: I hope it's a different U-boat like a U30b or do you mean the U28c is next.

Duplicating Kato is not necessarily a bad thing. I think it was over 20 yrs between U30C runs.


bbussey

  • Crew
  • *
  • Posts: 8890
  • Gender: Male
  • Respect: +4713
    • www.bbussey.net
Re: 2016 Amherst Railroad Show Report
« Reply #37 on: January 31, 2016, 01:09:41 AM »
0
U28C, not U30C
Bryan Busséy
NHRHTA #2246
NSE #1117
www.bbussey.net


Ed Kapuscinski

  • Global Moderator
  • Crew
  • *
  • Posts: 24738
  • Head Kino
  • Respect: +9249
    • Conrail 1285
Re: 2016 Amherst Railroad Show Report
« Reply #38 on: January 31, 2016, 08:00:37 AM »
0
Too few orders to tool the right trucks? From a company with an unproven track record? Talk about a self fulfilling prophecy...

Well, my order probably just went down.

thomasjmdavis

  • Crew
  • *
  • Posts: 4080
  • Respect: +1104
Re: 2016 Amherst Railroad Show Report
« Reply #39 on: January 31, 2016, 08:40:03 AM »
0
I've just read through this and must have missed something, hoping it is ok to ask as it must have already been answered, but - which unproven company did not get enough orders for Flexicoil trucks for which locomotive?
Tom D.

I have a mind like a steel trap...a VERY rusty, old steel trap.

mu26aeh

  • Crew
  • *
  • Posts: 5377
  • Gender: Male
  • Respect: +3603
Re: 2016 Amherst Railroad Show Report
« Reply #40 on: January 31, 2016, 08:49:43 AM »
0
I've just read through this and must have missed something, hoping it is ok to ask as it must have already been answered, but - which unproven company did not get enough orders for Flexicoil trucks for which locomotive?

Intermountain on their SD40-2 locomotives

muktown128

  • Crew
  • *
  • Posts: 933
  • Respect: +108
Re: 2016 Amherst Railroad Show Report
« Reply #41 on: January 31, 2016, 09:07:19 AM »
0
I hope the production M1s don't have crooked keystones...!   :scared:
I noticed that pretty quickly as well.
Otherwise, I think these look pretty good, but need better close up pics.

I can wait another month or 2.  Still waiting for my MBK order to arrive with a couple of P70 coaches.  Also, I received an email from Pete on Friday that my Bowser GLa and H21 hoppers are shipping.  I didn't realize how many I ordered.

Need some Pennsy on those U-boats!

Scott   

ai5629

  • Crew
  • *
  • Posts: 783
  • Respect: +214
Re: 2016 Amherst Railroad Show Report
« Reply #42 on: January 31, 2016, 09:09:20 AM »
0
Too few orders to tool the right trucks? From a company with an unproven track record? Talk about a self fulfilling prophecy...

Well, my order probably just went down.

+1.  If I have to put up with Conrail SD40-2's with HTC trucks, I will be purchasing and painting Kato units.  They will run like a Swiss watch, and I could modify the HTC truck ala Kapuscinski.  Thanks.

Jeff
Jeff Lopez

djconway

  • Crew
  • *
  • Posts: 482
  • Respect: +74
Re: 2016 Amherst Railroad Show Report
« Reply #43 on: January 31, 2016, 09:15:14 AM »
0
That's awfully picky of you.  :trollface:

I should have photographed the front of the other one, I can't remember what it looked like. There were a bunch of people around BLI, so I just grabbed a couple pictures and left.

I'm just hoping they do deliver them😠

bbussey

  • Crew
  • *
  • Posts: 8890
  • Gender: Male
  • Respect: +4713
    • www.bbussey.net
Re: 2016 Amherst Railroad Show Report
« Reply #44 on: January 31, 2016, 10:09:59 AM »
0
Fox Valley PS coal hopper.

Bryan Busséy
NHRHTA #2246
NSE #1117
www.bbussey.net