« previous next »
Pages: [1] 2 3 ... 5   Go Down

Author Topic: Pacific Electric trolleys in N-Scale  (Read 16010 times)

0 Members and 1 Guest are viewing this topic.

160pennsy

  • Crew
  • *
  • Posts: 372
  • Gender: Male
  • Respect: +183
Pacific Electric trolleys in N-Scale
« on: August 30, 2015, 04:00:21 PM »
0
Just read the following listing for sale in the Trading Post and wanted to show Phillip H. another assembled & weathered PE trolley (OOP resin kit from Miniatures by Eric). Won traction award @ N Scale East 2014 Chantilly, VA (see enclosed photos for further details). I would have never finished the trolley in time for the convention nor thought it worthy of contest entry if not for fellow NRMRC member & friend Jim Kalenowski who helped mentor me through out the painting, decaling, weathering & track work portions of this build and to Joe Peacock (another good friend / NRMRC member ) who helped out with LED light pipes & painting metal details as well as constructing the wooden base that the trolley sits on. I honestly value their assembly help, opinions and guidance that these two gentlemen provide....Better modeling thru peer pressure !

https://www.therailwire.net/forum/index.php?topic=36863.0

The "other" Pacific Electric N-Scale trolley  ;)

















« Last Edit: August 30, 2015, 08:38:06 PM by 160pennsy »
Logged
Paul Ohegyi
Current Member
https://nrmrc.org/

johnb

  • Crew
  • *
  • Posts: 1739
  • Respect: +928
    • My blog
Re: Pacific Electric trolleys in N-Scale
« Reply #1 on: August 30, 2015, 04:06:30 PM »
0
I wish that Eric made more
Logged

strummer

  • Crew
  • *
  • Posts: 998
  • Respect: +65
Re: Pacific Electric trolleys in N-Scale
« Reply #2 on: August 30, 2015, 04:12:06 PM »
0
Very nice indeed...

Mark in (sunny again) Oregon
Logged

sd45elect2000

  • Crew
  • *
  • Posts: 1101
  • Respect: +452
Re: Pacific Electric trolleys in N-Scale
« Reply #3 on: August 30, 2015, 04:32:26 PM »
0
What's not to like !!! Interurbans, the most neglected piece of the transition era.

Randy Stahl
Logged

sirenwerks

  • Crew
  • *
  • Posts: 5847
  • Gender: Male
  • Respect: +380
Re: Pacific Electric trolleys in N-Scale
« Reply #4 on: August 30, 2015, 06:46:56 PM »
0
Nice model.  I love seeing photos of the old PE, North Shore, and CTA and sometimes wish to model traction; the North Shore especially since it did have some neat freight action and those ex-Oregon motors.  But I gotta ask a silly question... with motors getting smaller and trolley cars basically only needing to be self-propelled, is there any means to make N scale traction models with less obtrusive drive mechanisms?  I'm not imagining one that can be concealed in a N scale rattan seat, just something with a lower profile.
Logged
Failing to prepare is preparing to fail.

160pennsy

  • Crew
  • *
  • Posts: 372
  • Gender: Male
  • Respect: +183
Re: Pacific Electric trolleys in N-Scale
« Reply #5 on: August 30, 2015, 06:58:00 PM »
0
Quote from: sirenwerks on August 30, 2015, 06:46:56 PM
But I gotta ask a silly question... with motors getting smaller and trolley cars basically only needing to be self-propelled, is there any means to make N scale traction models with less obtrusive drive mechanisms?  I'm not imagining one that can be concealed in a N scale rattan seat, just something with a lower profile.

Yes...Not sure if this power chassis was available when I built my Miniatures by Eric kit.



Or....you can also do something like this but it can only work for trolley models that have floors/chassis lower to the tracks



After I purchased his NT-K1 kit Eric did provide a resin floor/chassis that had provisions for snapping in Tomix power trucks & also slightly modifying the motor, cast metal weights and phosphor bronze pick up strips. I can attach some photos of my PE trolley with the shell off so you can see what's "under the hood" BUT I'm in the process of adding a Digitrax decoder to it.
« Last Edit: August 30, 2015, 07:24:46 PM by 160pennsy »
Logged
Paul Ohegyi
Current Member
https://nrmrc.org/

sd45elect2000

  • Crew
  • *
  • Posts: 1101
  • Respect: +452
Re: Pacific Electric trolleys in N-Scale
« Reply #6 on: August 30, 2015, 07:13:10 PM »
0
Quote from: 160pennsy on August 30, 2015, 06:58:00 PM
Yes...Not sure if this power chassis was available when I built my Miniatures by Eric kit.



After I purchased his NT-K1 kit Eric did provide a resin floor/chassis that had provisions for snapping in Tomix power trucks & also slightly modifying the motor, cast metal weights and phosphor bronze pick up strips. I can attach some photos of my PE trolley with the shell off so you can see what's "under the hood" BUT I'm in the process of adding a Digitrax decoder to it.
Logged

sd45elect2000

  • Crew
  • *
  • Posts: 1101
  • Respect: +452
Re: Pacific Electric trolleys in N-Scale
« Reply #7 on: August 30, 2015, 07:15:52 PM »
0
I have the entire North Shore fleet in roughly 1950 ( with a few exceptions including the Oregon Electrics). 

I think it totals to around 170 cars including the 4 steeplecabs,2 battery motors and 40 express cars.
« Last Edit: August 30, 2015, 07:29:11 PM by sd45elect2000 »
Logged

Philip H

  • Crew
  • *
  • Posts: 8910
  • Gender: Male
  • Respect: +1655
    • Layout Progress Blog
Re: Pacific Electric trolleys in N-Scale
« Reply #8 on: August 30, 2015, 07:54:40 PM »
0
I was unaware of the MBE kit - I sit corrected. Looks like yo did a great job!
Logged
Philip H.
Chief Everything Officer
Baton Rouge Southern RR - Mount Rainier Division.

strummer

  • Crew
  • *
  • Posts: 998
  • Respect: +65
Re: Pacific Electric trolleys in N-Scale
« Reply #9 on: August 30, 2015, 08:40:43 PM »
0
Those are awesome...more pix, please....:)

Mark in Oregon
Logged

sirenwerks

  • Crew
  • *
  • Posts: 5847
  • Gender: Male
  • Respect: +380
Re: Pacific Electric trolleys in N-Scale
« Reply #10 on: August 30, 2015, 10:06:59 PM »
0
Quote from: sd45elect2000 on August 30, 2015, 07:15:52 PM
I have the entire North Shore fleet in roughly 1950 ( with a few exceptions including the Oregon Electrics). 

I think it totals to around 170 cars including the 4 steeplecabs,2 battery motors and 40 express cars.

These are the products available on Shapeways?
Logged
Failing to prepare is preparing to fail.

peteski

  • Crew
  • *
  • Posts: 32954
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +5340
    • Coming (not so) soon...
Re: Pacific Electric trolleys in N-Scale
« Reply #11 on: August 30, 2015, 11:42:22 PM »
0
Very nice model Paul - congratulations on the award!
Logged
. . . 42 . . .

nkalanaga

  • Crew
  • *
  • Posts: 9896
  • Respect: +1446
Re: Pacific Electric trolleys in N-Scale
« Reply #12 on: August 31, 2015, 12:45:40 AM »
0
Where did you get the trolley poles?  Or are they HO "finescale" poles?
Logged
N Kalanaga
Be well

johnb

  • Crew
  • *
  • Posts: 1739
  • Respect: +928
    • My blog
Re: Pacific Electric trolleys in N-Scale
« Reply #13 on: August 31, 2015, 01:32:49 AM »
0
Logged

strummer

  • Crew
  • *
  • Posts: 998
  • Respect: +65
Re: Pacific Electric trolleys in N-Scale
« Reply #14 on: August 31, 2015, 02:47:21 AM »
0
Say, that looks really nice...

Mark in Oregon
Logged
Pages: [1] 2 3 ... 5   Go Up
« previous next »