« previous next »
Pages: [1]   Go Down

Author Topic: Micro-Trains 77000 undecs  (Read 1056 times)

0 Members and 1 Guest are viewing this topic.

gbcaboose

  • Crew
  • *
  • Posts: 139
  • Respect: +14
Micro-Trains 77000 undecs
« on: June 13, 2015, 10:15:13 PM »
0
Does anyone where I might be able to get a few of these? Hopefully about 6. My regular supplies are have run dry.

It seems MTL doesn't release the undecs as often as they used to.

Thanks, Mike
Logged

jimmo

  • Crew
  • *
  • Posts: 902
  • Gender: Male
  • Representing Willmodels
  • Respect: +6
    • Willmodels
Re: Micro-Trains 77000 undecs
« Reply #1 on: June 13, 2015, 10:37:56 PM »
0
What is a 77000? We don't all have the MTL catalog memorized.
Logged
James R. Will

gbcaboose

  • Crew
  • *
  • Posts: 139
  • Respect: +14
Re: Micro-Trains 77000 undecs
« Reply #2 on: June 13, 2015, 10:40:39 PM »
0
It's the 50' smoothside Single sliding door boxcar with no roofwalk. Sorry for not including the info in the original post.

Mike
Logged

gbcaboose

  • Crew
  • *
  • Posts: 139
  • Respect: +14
Re: Micro-Trains 77000 undecs
« Reply #3 on: June 13, 2015, 10:49:32 PM »
0
Here's a pic of a 77000:
Logged

OldEastRR

  • Crew
  • *
  • Posts: 3348
  • Gender: Male
  • Respect: +281
Re: Micro-Trains 77000 undecs
« Reply #4 on: June 13, 2015, 10:58:44 PM »
0
If you don't mind stripping some, BLW has MKT 50's in their "discontinued MTL" category. Possibly that is also the car used in the MTL Canadian Province train series.
Logged

nkalanaga

  • Crew
  • *
  • Posts: 9811
  • Respect: +1409
Re: Micro-Trains 77000 undecs
« Reply #5 on: June 14, 2015, 12:32:50 AM »
0
As a last resort, removing the roofwalk and plugging the holes isn't that hard.  Drill out the holes with a 5/64 bit and use Evergreen 0.080 round rod.  A little careful knife, file, and sanding work will clean the roof up nicely.
Logged
N Kalanaga
Be well
Pages: [1]   Go Up
« previous next »