« previous next »
Pages: [1]   Go Down

Author Topic: I Need Some Brass Strip Cut to Length...  (Read 1464 times)

0 Members and 1 Guest are viewing this topic.

Kisatchie

  • Crew
  • *
  • Posts: 4180
  • Gender: Male
  • Respect: +62
I Need Some Brass Strip Cut to Length...
« on: March 23, 2015, 06:03:19 PM »
0
I'm scratchbuilding some logging cars, and I decided to use 3/4" brass strip as the car weights. However, I'm not having much success cutting the strips the proper length. The brass moves slightly as I try to cut it with a razor saw and miter box.

Does anyone have the ability to smoothly and accurately cut this brass strip into the proper lengths? With the right tools, it shouldn't take more than a few minutes.

If so, how much would you charge to cut 16 pieces about 2-3/4" long? I'll include a sample I managed to cut that is the proper length.

If we can work something out, I'll mail you the strips and include a money order or personal check (your choice) to pay for the work plus return postage.


Hmm... I told Kiz to use
a sharp ax, but he won't
listen to me...

Logged
Two scientists create a teleportation ray, and they try it out on a cricket. They put the cricket on one of the two teleportation pads in the room, and they turn the ray on.
The cricket jumps across the room onto the other pad.
"It works! It works!"

Philip H

  • Crew
  • *
  • Posts: 8910
  • Gender: Male
  • Respect: +1655
    • Layout Progress Blog
Re: I Need Some Brass Strip Cut to Length...
« Reply #1 on: March 23, 2015, 06:07:04 PM »
0
Do you have some tin snips? If so you should be able to score the top of the brass with the back of an Xacto knife and then snip right through unless its really thick.
Logged
Philip H.
Chief Everything Officer
Baton Rouge Southern RR - Mount Rainier Division.

Kisatchie

  • Crew
  • *
  • Posts: 4180
  • Gender: Male
  • Respect: +62
Re: I Need Some Brass Strip Cut to Length...
« Reply #2 on: March 23, 2015, 06:14:07 PM »
0
Alas, no tin snips. I'm pretty much a non-tools guy, except for some assorted small tools for scratchbuilding in N scale - X-acto knives, taps and drills, some files, tweezers, jewelers screwdrivers and scale rulers. I have pretty much nothing that would ever come in handy, except a hammer and some large screwdrivers.


Hmm... good thing, or
else Kiz woulda lost a
few fingers by now...

Logged
Two scientists create a teleportation ray, and they try it out on a cricket. They put the cricket on one of the two teleportation pads in the room, and they turn the ray on.
The cricket jumps across the room onto the other pad.
"It works! It works!"

glakedylan

  • Crew
  • *
  • Posts: 1481
  • Gender: Male
  • Give Respect. Expect Respect.
  • Respect: +234
    • Justice Kindness Humbleness —Micah 6.8
Re: I Need Some Brass Strip Cut to Length...
« Reply #3 on: March 23, 2015, 06:32:30 PM »
0
have you tried securing the strip in the miter box
double sided tape?
a small clamp?
or is it more a problem with the saw
do you have a dremel w/ cut off disks?
Logged
PRRT&HS #9304 | PHILLY CHAPTER #2384

Kisatchie

  • Crew
  • *
  • Posts: 4180
  • Gender: Male
  • Respect: +62
Re: I Need Some Brass Strip Cut to Length...
« Reply #4 on: March 23, 2015, 07:14:41 PM »
0
Quote from: glakedylan on March 23, 2015, 06:32:30 PM
have you tried securing the strip in the miter box
double sided tape?
a small clamp?
or is it more a problem with the saw
do you have a dremel w/ cut off disks?

I have no double sided tape, nor a small clamp, nor a Dremel tool. I feel like I'm bankrupt...


Hmm... you look it too,
Kiz...




Logged
Two scientists create a teleportation ray, and they try it out on a cricket. They put the cricket on one of the two teleportation pads in the room, and they turn the ray on.
The cricket jumps across the room onto the other pad.
"It works! It works!"

Kisatchie

  • Crew
  • *
  • Posts: 4180
  • Gender: Male
  • Respect: +62
Re: I Need Some Brass Strip Cut to Length...
« Reply #5 on: March 23, 2015, 07:36:40 PM »
0
After experimenting, I figured out a way to cut the brass strip. I'm almost finished.

Thanks for those who read this and replied. I'm good to go.


Hmm... so Kiz used the
ax after all...

Logged
Two scientists create a teleportation ray, and they try it out on a cricket. They put the cricket on one of the two teleportation pads in the room, and they turn the ray on.
The cricket jumps across the room onto the other pad.
"It works! It works!"

Santa Fe Guy

  • Crew
  • *
  • Posts: 1096
  • Respect: +359
Re: I Need Some Brass Strip Cut to Length...
« Reply #6 on: March 23, 2015, 09:08:34 PM »
0
Glad it worked out for you in the end. It's a bugger when you do not have the right tools on occasions.
Rod.
Logged
Santafesd40.blogspot.com

Ed Kapuscinski

  • Global Moderator
  • Crew
  • *
  • Posts: 24744
  • Head Kino
  • Respect: +9269
    • Conrail 1285
Re: I Need Some Brass Strip Cut to Length...
« Reply #7 on: March 24, 2015, 04:15:11 PM »
0
Quote from: Santa Fe Guy on March 23, 2015, 09:08:34 PM
Glad it worked out for you in the end. It's a bugger when you do not have the right tools on occasions.
Rod.

And for those occasions... Harbor Freight!

THE place for tools you need to use once.
Logged

John

  • Administrator
  • Crew
  • *****
  • Posts: 13392
  • Respect: +3255
Re: I Need Some Brass Strip Cut to Length...
« Reply #8 on: March 24, 2015, 06:06:37 PM »
0
Quote from: Ed Kapuscinski on March 24, 2015, 04:15:11 PM
And for those occasions... Harbor Freight!

THE place for tools you need to use once.

because some of them will only work once ;)
Logged

mu26aeh

  • Crew
  • *
  • Posts: 5380
  • Gender: Male
  • Respect: +3605
Re: I Need Some Brass Strip Cut to Length...
« Reply #9 on: March 25, 2015, 07:00:02 PM »
0
**** Disclaimer ****** This is not from my personal experience, but from someone my ex-boss knew.

He knew someone who used the " Insert big box store " rental service.  The said person who needed a tool he didn't have, would purchase said tool, use it for the required job, then returned it as not what he needed, didn't do job he expected, etc. 
Logged
Pages: [1]   Go Up
« previous next »