Author Topic: Blatz Reefer  (Read 1368 times)

0 Members and 1 Guest are viewing this topic.

tom mann

  • Administrator
  • Crew
  • *****
  • Posts: 10917
  • Representing The Railwire on The Railwire
  • Respect: +1014
    • http://www.chicagoswitching.com
Blatz Reefer
« on: January 23, 2015, 03:23:34 PM »
0
This was one of the first models that I seriously attempted to weather.  The photo dates from May 16, 2004:



I weathered models before this (even in elementary school in '87), but this was one of the first models where I remember thinking "I'm going to do this over and over again until I get good".

After I did this Schlitz reefer, I decided to get it out and clean it up and bring the weathering up to my current skill level.  I also wanted to get more board variation, as suggested by @wazzou .  First I lightly sanded the sides and painted some grey, removing some of it to blend until the yellow. The intention here is to try to make it look like the old yellow paint has blistered and flaked off, and the old grey wood is now visible.  I assume this happens on these old reefers because the roof overhang is enough to protect the upper half of the body.



Focus on the end:


Next step is to add some Ivory Black, trying to highlight individual boards:



More later on...

wazzou

  • Crew
  • *
  • Posts: 6729
  • #GoCougs
  • Respect: +1655
Re: Blatz Reefer
« Reply #1 on: January 23, 2015, 03:46:00 PM »
0
Yep, that's the ticket.  That's the look on the ends, roof and running boards that I think is needed in places on the sides as well. 
Bryan

Member of NPRHA, Modeling Committee Member
http://www.nprha.org/
Member of MRHA


Puddington

  • Crew
  • *
  • Posts: 3874
  • Gender: Male
  • Modelling is the best medicine for what ails me.
  • Respect: +245
    • The Canadian Pacific Railway's Dominion
Re: Blatz Reefer
« Reply #2 on: January 23, 2015, 04:16:31 PM »
0
The ends are perfect.... that is stunning Tom.
Model railroading isn't saving my life, but it's providing me moments of joy not normally associated with my current situation..... Train are good!

tom mann

  • Administrator
  • Crew
  • *****
  • Posts: 10917
  • Representing The Railwire on The Railwire
  • Respect: +1014
    • http://www.chicagoswitching.com
Re: Blatz Reefer
« Reply #3 on: January 23, 2015, 08:49:41 PM »
0
Same treatment for the side...



My great grandfather worked for Blatz.

chicken45

  • Crew
  • *
  • Posts: 4500
  • Gender: Male
  • Will rim for upvotes.
  • Respect: +1013
    • Facebook Profile
Re: Blatz Reefer
« Reply #4 on: January 23, 2015, 10:44:43 PM »
0
Crazy! I remember talking to you about my learning "opportunities" with weathering decks.
Your wood (phrasing) looks better on this reefer than the other one (without seeing prototype pictures).
Josh Surkosky

Here's a Clerihew about Ed. K.

Ed Kapucinski
Every night, he plants a new tree.
But mention his law
and you've pulled your last straw!

Alternate version:
Ed Kapucinski
Every night, he plants a new tree.
He asks excitedly "Did you say Ménage à Trois?"
No, I said "Ed's Law."

Kisatchie

  • Crew
  • *
  • Posts: 4180
  • Gender: Male
  • Respect: +62
Re: Blatz Reefer
« Reply #5 on: January 26, 2015, 05:16:49 PM »
0
Same treatment for the side...



Man, that is impressive!


Hmm... so, ya think Kiz
likes it...?


Two scientists create a teleportation ray, and they try it out on a cricket. They put the cricket on one of the two teleportation pads in the room, and they turn the ray on.
The cricket jumps across the room onto the other pad.
"It works! It works!"

tom mann

  • Administrator
  • Crew
  • *****
  • Posts: 10917
  • Representing The Railwire on The Railwire
  • Respect: +1014
    • http://www.chicagoswitching.com
Re: Blatz Reefer
« Reply #6 on: January 27, 2015, 11:06:06 AM »
0
I did the other side, using a little lighter of a hand:



I also used some raw umber to make some wood areas look a little more browner:



And yes, all the steel parts are NeoLubed!

tom mann

  • Administrator
  • Crew
  • *****
  • Posts: 10917
  • Representing The Railwire on The Railwire
  • Respect: +1014
    • http://www.chicagoswitching.com
Re: Blatz Reefer
« Reply #7 on: January 27, 2015, 11:40:23 AM »
0
Sprayed a little thinned black primer on the roof to look like a layer of old steam-era soot.





Cool to see how the unweathered car looks so plasticy.