« previous next »
Pages: [1]   Go Down

Author Topic: Depressurizing spray paint cans?  (Read 3614 times)

0 Members and 1 Guest are viewing this topic.

Chris333

  • Crew
  • *
  • Posts: 18396
  • Respect: +5668
Depressurizing spray paint cans?
« on: March 01, 2013, 05:48:32 AM »
0
I bought Floquil zinc chromate primer spray paint for my G22 gondola and it's new containers. The problem is I can't get them to spray decent no matter what tip I try. I bought 2 larger spray cans and I don't want to throw out the paint. How do I depressurize the cans so I can open them?

 :facepalm: yes I know
Logged

Sokramiketes

  • Crew
  • *
  • Posts: 4974
  • Better modeling through peer pressure...
  • Respect: +1530
    • Modutrak
Re: Depressurizing spray paint cans?
« Reply #1 on: March 01, 2013, 08:55:49 AM »
0
Spray with the can upside down, then crack open with a church key.  The best part is the paint will be pre-thinned and perfect for airbrushing!

You might lose a little paint until the paint falls below the level of the intake straw... but not much.
Logged

pedro

  • Crew
  • *
  • Posts: 550
  • Gender: Male
  • Respect: +341
Re: Depressurizing spray paint cans?
« Reply #2 on: March 01, 2013, 11:02:49 AM »
0
Google "decanting spray paint for airbrushing". There are many plastic modelers who have done this and articles/videos posted. No need to open the can, you can decant it into a container in small amounts. Just remember the "decanting" part of it before you seal the container! It has to de-gas before you can seal it.
Logged

peteski

  • Crew
  • *
  • Posts: 32958
  • Gender: Male
  • Honorary Resident Curmudgeon
  • Respect: +5343
    • Coming (not so) soon...
Re: Depressurizing spray paint cans?
« Reply #3 on: March 01, 2013, 01:02:23 PM »
0
Depending on the goal, I've used both methods. But most of the time I decant only as much as it is needed as I think the paint lasts longer inside the can than in a bottle.
Logged
. . . 42 . . .

Robbman

  • Crew
  • *
  • Posts: 3007
  • Respect: +18
Re: Depressurizing spray paint cans?
« Reply #4 on: March 02, 2013, 02:24:18 AM »
0
Quote from: Chris333 on March 01, 2013, 05:48:32 AM
I bought Floquil zinc chromate primer spray paint for my G22 gondola and it's new containers. The problem is I can't get them to spray decent no matter what tip I try. I bought 2 larger spray cans and I don't want to throw out the paint. How do I depressurize the cans so I can open them?

 :facepalm: yes I know


Give them to a junkie... BOOM BADDA BOOM
Logged

pnolan48

  • Crew
  • *
  • Posts: 1754
  • Respect: +136
Re: Depressurizing spray paint cans?
« Reply #5 on: March 02, 2013, 11:17:57 AM »
0
I've sprayed directly into an air brush bottle. A little messy, but not too bad.
Logged

Lemosteam

  • Crew
  • *
  • Posts: 5919
  • Gender: Male
  • PRR, The Standard Railroad of my World
  • Respect: +3668
    • Designer at Keystone Details
Re: Depressurizing spray paint cans?
« Reply #6 on: March 24, 2013, 12:16:33 AM »
0
Quote from: Chris333 on March 01, 2013, 05:48:32 AM
I bought Floquil zinc chromate primer spray paint for my G22 gondola and it's new containers. The problem is I can't get them to spray decent no matter what tip I try. I bought 2 larger spray cans and I don't want to throw out the paint. How do I depressurize the cans so I can open them?

 :facepalm: yes I know

Chris have you tried a Tamiya nozzle?
Logged

bigford

  • Crew
  • *
  • Posts: 173
  • Gender: Male
  • Respect: 0
Re: Depressurizing spray paint cans?
« Reply #7 on: May 01, 2013, 01:26:06 AM »
0
i forget what i used. i want to say a new wd40 nozzle and tube
i sprayed the paint down the tube of the glass airbrush jar
Logged

Chris333

  • Crew
  • *
  • Posts: 18396
  • Respect: +5668
Re: Depressurizing spray paint cans?
« Reply #8 on: May 01, 2013, 01:48:11 AM »
0
I started holding the can upside-down to get the air out and then my hand got tired...

It doesn't matter much as there are no PRR gon decals to put on after I paint the thing.  :|
Logged
Pages: [1]   Go Up
« previous next »