Author Topic: BLMA Top Gon  (Read 1938 times)

0 Members and 1 Guest are viewing this topic.

Wlal13again

  • Crew
  • *
  • Posts: 766
  • Gender: Male
  • Respect: +23
BLMA Top Gon
« on: January 01, 2013, 01:26:32 PM »
0
Found 5 at a hobby shop last week, one has the yellow safety stripes which is too late for me..anyone know if they will come off using a pencil eraser with minimal effort and damage?
You`ll never find a Philly cheese steak on a menu in Philadelphia. It`s called a cheesesteak and we all know where it`s from...

Ed Kapuscinski

  • Global Moderator
  • Crew
  • *
  • Posts: 24739
  • Head Kino
  • Respect: +9259
    • Conrail 1285
Re: BLMA Top Gon
« Reply #1 on: January 01, 2013, 02:52:07 PM »
0
I think they're all too modern for you.

Wlal13again

  • Crew
  • *
  • Posts: 766
  • Gender: Male
  • Respect: +23
Re: BLMA Top Gon
« Reply #2 on: January 01, 2013, 03:31:23 PM »
0
I think they're all too modern for you.

Yeah true, but I have a bunch of 1994 era stuff that I bought over the years and I`m "branching out" a bit in my old age... ;)
You`ll never find a Philly cheese steak on a menu in Philadelphia. It`s called a cheesesteak and we all know where it`s from...

conrailthomas519

  • Crew
  • *
  • Posts: 341
  • Gender: Male
  • BNSF / Montana Rail Link
  • Respect: +11
Re: BLMA Top Gon
« Reply #3 on: January 01, 2013, 03:46:15 PM »
0
removal of the yellow safety stripes shouldn't be too difficult. Try a chisel xacto blade? I've found sucess by taken the blade end and lightly scraping the unwanted paint. To do this, hold the xacto blade edge 90 degress to the car and lightly drag it. It may take a couple of passes to remove all of it. With that being said, even if you were to make a small mistake, it could be remedied with weathering.
Just take your time..
TMM

Wlal13again

  • Crew
  • *
  • Posts: 766
  • Gender: Male
  • Respect: +23
Re: BLMA Top Gon
« Reply #4 on: January 01, 2013, 03:53:18 PM »
0
removal of the yellow safety stripes shouldn't be too difficult. Try a chisel xacto blade? I've found sucess by taken the blade end and lightly scraping the unwanted paint. To do this, hold the xacto blade edge 90 degress to the car and lightly drag it. It may take a couple of passes to remove all of it. With that being said, even if you were to make a small mistake, it could be remedied with weathering.
Just take your time..

I thought of that but I was wondering if anyone had success with any other techniques..
You`ll never find a Philly cheese steak on a menu in Philadelphia. It`s called a cheesesteak and we all know where it`s from...

Kisatchie

  • Crew
  • *
  • Posts: 4180
  • Gender: Male
  • Respect: +62
Re: BLMA Top Gon
« Reply #5 on: January 01, 2013, 03:58:31 PM »
0
I thought of that but I was wondering if anyone had success with any other techniques..


Hmm... I prefer to use
gunpowder...


Two scientists create a teleportation ray, and they try it out on a cricket. They put the cricket on one of the two teleportation pads in the room, and they turn the ray on.
The cricket jumps across the room onto the other pad.
"It works! It works!"

Bob Bufkin

  • Crew
  • *
  • Posts: 6397
  • Gender: Male
  • Respect: +44
Re: BLMA Top Gon
« Reply #6 on: January 01, 2013, 04:43:25 PM »
0
I've had success (at least on Kato cars) by using a nail polish remover and then a pencil eraser.   Rub very lightly.   Rarely mess up the paint underneath.

CONRAIL FAN

  • Crew
  • *
  • Posts: 86
  • Gender: Male
  • Respect: +12
Re: BLMA Top Gon
« Reply #7 on: January 01, 2013, 07:59:22 PM »
0
Try Micosol, but it takes some time
JEROME

daniel_leavitt2000

  • Crew
  • *
  • Posts: 6345
  • Respect: +1303
Re: BLMA Top Gon
« Reply #8 on: January 01, 2013, 08:49:52 PM »
0
I heard bestine works well  :D
There's a shyness found in reason
Apprehensive influence swallow away
You seem to feel abysmal take it
Then you're careful grace for sure
Kinda like the way you're breathing
Kinda like the way you keep looking away

Kisatchie

  • Crew
  • *
  • Posts: 4180
  • Gender: Male
  • Respect: +62
Re: BLMA Top Gon
« Reply #9 on: January 01, 2013, 08:58:19 PM »
0
I heard bestine works well  :D


Hmm... the bananas are
going to hit the fan now...


Two scientists create a teleportation ray, and they try it out on a cricket. They put the cricket on one of the two teleportation pads in the room, and they turn the ray on.
The cricket jumps across the room onto the other pad.
"It works! It works!"