Start Foaming..Lets See the STEAM!!!

[RWCJr]

Fantastic winter scene!

[UP4-8-8-4]

Southern Pacific GS engines.
Key Brass GS-4 Daylight #4449, Key Brass GS-3 Daylight #4416, Kato GS-4 Daylight #4453, Kato GS-4 Daylight #4450, Kato GS-4 Daylight #4449, Con-Cor GS-4 Daylight #4431, Con-Cor GS-4 Daylight #4449, Kato GS-4 Warbaby #4431, Con-Cor GS-4 Warbaby #4435, Con-Cor GS-4 Warbaby #4436.












Ernie

[superturbine]

Here is a Pic of the Milwaukee Road S3 #261 I am almost finished with.  It still needs airtanks and clear coat.
I have not been able to get anything done lately so its good to get going again.

[superturbine]

Here is an engine that I got for $100.00 off of Ebay.  Just needed a draw bar repair and paint.

[delamaize]

Ok so here is the most current picture of my A-4 project. Air pumps and rear light are now applied, I still need to do marker lights, lettering and numbering, and a coal load, and I also see a spot on the tender i need to sand some paint build up down, but it's looking a little more NP-ish now.

On another note, I HATE trying to paint on white wheels. Couldn't get the drivers 100% to save my life! 

[UP4-8-8-4]

Pecos River Brass, NYC Niagaras.







Ernie

[superturbine]

Looks good delamaize,  nobody (except for me) will realize how much work you put into building the cab and boiler out of brass. 

P.S. I know the way you feel about the paint flaw.  Up close shot of n scale engines bring out imperfections you had never seen with the naked eye.

[superturbine]

Ernie-
The niagaras look good.  You should paint the tires black.... You'll be surprised.  Take it from the paint expert!!!!! Ha!

[Nato]

          Here we go again,bring back this thread. First photo a Rivarossi Pacific with aVandy Tender from the old Aspen Models ,these tenders were made frrom European Tank Cars.



UP 4-8-4 809. This is a Foob F-E-F 1 Bachmann conversion. The prototype 809 had a centipede tender late in her career from a retired F-E-F 2 so the 809 tender could be used for a baby turbine tender. However when the tender swap ocurred locos were back to black paint scheme not two tone gray as on my model. The tender is a Rivarossi. Nate Goodman (Nato).

[superturbine]

Nate.... Good looking Bachman FEF. I had forgotten that 809 had received a centipede tender.  Thanks for bring the thread back to life. 

[superturbine]

400



Thanks for all of those who have contributed to making the Railwire the home for N Scale Foamers and thank you Railwire!

[Cajonpassfan]

Jason, good looking brass SP 4-10-2! Now if we could get one FTT for UP! Similar but no cigar....
Otto K.

[hegstad1]

Here is my Oriental Limited Brass A4.  I made some changes to it and my good friend Joe Valerio painted it for me. 

[Nato]

    That is a very nice NP A4. Nate Goodman (Nato).

[superturbine]

I agree really nice A4.... I need to paint one of mine with the grey boiler.

Here is my FEF-2 that I finished tonight.

Had to post it on the steam thread also!!