Author Topic: Kankakee and Points East (modules)  (Read 2465 times)

0 Members and 1 Guest are viewing this topic.

Zox

  • Crew
  • *
  • Posts: 1120
  • Gender: Male
  • Respect: +2
    • Lord Zox's Home Page
Kankakee and Points East (modules)
« on: July 18, 2012, 09:51:38 PM »
0
Up to this point, I hadn't put a topic in "Layout Engineering Reports," because I don't have a layout, just several Smart-N modules. But since MC Fujiwara has broken that ground with his Free-MoN modules, I figured it was about time to try to consolidate my scattered posts.

There's also the fact that, at train shows, my modules invariable get set up in the same order. So effectively they do function as a layout, albeit one that's only assembled for three days at a time. :)

So, here's my little empire:



From oldest to most recent...

1. North Sheldon / Area 53

My loop module is split into two scenes, that are separated by a skyboard on the module and about 700 miles on the map. North Sheldon is a freelanced engine facility nominally located in west-central Indiana, with a modern-era roundhouse and vestigial evidence of earlier uses. It's also one of the main control points on MARRS' N-scale setups. Initial scenery was completed many moons ago, and I intend to go back eventually and detail the heck out of it, but newer projects keep intruding. Since the usual geometry of the MARRS layout puts this scene on the inside of the layout, it's a relatively low priority.





Area 53 is meant to represent a government facility that's recently had a major security upgrade, which involved abandoning an existing road and railroad crossing, and relocating the entrance to make room for a security checkpoint. This scene is largely complete, but it's continually being upgraded, including the in-progress addition of working crossing signals to replace earlier (extremely cheesy) dummy signals. And yes, the giant robot and UFO are removable for "serious" photos, if I were ever serious. :) (And I can't believe I don't have a better "overall" picture of the scene online...)





2. Langham Junction

Named after a 50-foot-high "mountain" near Kankakee, IL and the KB&S mainline, this "shuriken" module allows MARRS to use an extra loop on our dogbone-style layout. It also functions perfectly well as a normal corner module. Eventually, I have plans to replace this with a much more elaborately-sceniced module that performs the same function.





3. ICRR Bridge

This is my gesture toward the pure-prototype folks (sort of as a penance for Area 53): a to-scale replication of the Illinois Central's (now CN's) crossing of the Kankakee River at Kankakee, IL. There are lots of nitpicky details still to be taken care of here, but the overall effect is pretty much what I've been shooting for.





4. Kankakee Station

Just north of the bridge is the prototype for my latest module, the Kankakee, IL railroad station and its environs. This is the station mentioned in the song "City of New Orleans," and quite a classical railroad structure. This will be a somewhat selectively-compressed version of the area. I've got most of the landforms in place, and I'm working on plans for the structures.



Approximate area that will be represented on the module:



So, that's where things currently stand. When I have a chance, I'll collect the previous Railwire threads I've created for these modules and post a list of links.
Rob M., a.k.a. Zox
z o x @ v e r i z o n . n e t
http://lordzox.com/
It is said a Shaolin chef can wok through walls...

packers#1

  • Crew
  • *
  • Posts: 1478
  • Gender: Male
  • Modern Shortline Modeler
  • Respect: +562
Re: Kankakee and Points East (modules)
« Reply #1 on: July 18, 2012, 11:03:15 PM »
0
I've seen some of the KBS back when I was looking at the NYC in Indiana, and it seems like a pretty neat railroad. Cool to see someone working with it...and that robot will probably work well for security  :-X
Sawyer Berry
Clemson University graduate, c/o 2018
American manufacturing isn’t dead, it’s just gotten high tech

Rossford Yard

  • Crew
  • *
  • Posts: 1172
  • Respect: +145
Re: Kankakee and Points East (modules)
« Reply #2 on: July 19, 2012, 07:55:48 AM »
0
One of the best bridges I have seen built in N.  Looks great, and brings back memories of my many drives from Chicago down to U of I.....

w neal

  • Crew
  • *
  • Posts: 1434
  • Respect: +483
Re: Kankakee and Points East (modules)
« Reply #3 on: July 19, 2012, 12:36:59 PM »
0
Ooooo! You got my attention here. (scratching record sound) I drive through town on that highway bridge (just north of the depot) nearly every June when I return home from Galesburg RR days.

Your Kankakee river bridge looks fantastic! You have some real modeling ability!!! Wow!

Might I boldly suggest you lose the robot (must be related to CN's takeover) side of things and go more prototype - ish. It really compliments you and your ability sir! You need not model things exactly (rivet counting), just simulate things. It works wonders.

Fantastic concept! Keep modeling things around Kankakee!!!
Buffering...

Zox

  • Crew
  • *
  • Posts: 1120
  • Gender: Male
  • Respect: +2
    • Lord Zox's Home Page
Re: Kankakee and Points East (modules)
« Reply #4 on: July 23, 2012, 10:13:40 PM »
0
Thanks for the compliments, folks.

Might I boldly suggest you lose the robot (must be related to CN's takeover) side of things and go more prototype - ish.

Well, the robot's just standing there--he's mainly there to entertain the children at the train shows. I'm hoping the modelers will look past the robot and see stuff like the printed roads, chain-link fence, and ADA-compliant sidewalks. :)

By the way, I did find a better picture of Area 53:



(Larger version: http://lordzox.com/mrr/2012/a53_2010_1200.jpg)

The robot isn't visible from this angle. And for whatever reason, most people don't notice the Jupiter II parked on the roof.
Rob M., a.k.a. Zox
z o x @ v e r i z o n . n e t
http://lordzox.com/
It is said a Shaolin chef can wok through walls...

Zox

  • Crew
  • *
  • Posts: 1120
  • Gender: Male
  • Respect: +2
    • Lord Zox's Home Page
Worst Structure Mockup. Ever.
« Reply #5 on: September 24, 2012, 10:43:02 PM »
0
It doesn't  look like much:



And more importantly, it doesn't yet look much like this:



But the test print/cut/fold of the main roof is the first step on the road from 2D to 3D. Even if I still have some work to do on the shingles--the pattern looks good on-screen, but kinda falls apart when printed at the appropriate size for N scale.
Rob M., a.k.a. Zox
z o x @ v e r i z o n . n e t
http://lordzox.com/
It is said a Shaolin chef can wok through walls...