« previous next »
Pages: [1]   Go Down

Author Topic: BOWSER Model rolling stock  (Read 2666 times)

0 Members and 1 Guest are viewing this topic.

railbuilderdave

  • Crew
  • *
  • Posts: 316
  • Gender: Male
  • Respect: 0
BOWSER Model rolling stock
« on: February 27, 2008, 11:51:34 PM »
0
I was thinking of doing some bidding on a few rolling stock cars that are made by Bowser but I don't know anything about this company and if the models are any good.  Anyone know anything about these models?

Logged
============================

biker_ray_pa

  • Crew
  • *
  • Posts: 194
  • Gender: Male
  • Respect: +21
Re: BOWSER Model rolling stock
« Reply #1 on: February 28, 2008, 03:53:16 AM »
0
It's good quality stuff. Their HO stuff is good too. It's maybe not the best detailed stuff available, but good.
Logged
Never force it; get a bigger hammer.

daniel_leavitt2000

  • Crew
  • *
  • Posts: 6350
  • Respect: +1321
Re: BOWSER Model rolling stock
« Reply #2 on: February 28, 2008, 07:14:31 AM »
0
I would say about the same as Red Caboose or Huberts/LBF. Good detail but not top tier. No etched parts. They are slow to come out with new tooling which is unfortunate. I belive their stuff is all made in the USA.
Logged
There's a shyness found in reason
Apprehensive influence swallow away
You seem to feel abysmal take it
Then you're careful grace for sure
Kinda like the way you're breathing
Kinda like the way you keep looking away

wm3798

  • Crew
  • *
  • Posts: 16137
  • Gender: Male
  • I like models. She likes antiques. Perfect!
  • Respect: +6475
    • Western Maryland Railway Western Lines
Re: BOWSER Model rolling stock
« Reply #3 on: February 28, 2008, 09:59:39 AM »
0
A step above Trainman, not quite Intermountain.
Good pricing, good for fleet building.  Not always accurate on non-PRR stuff.  The WM-4-bay represents one car that was rostered as an experiment, but until Athearn/MDC re-does their 70T 3-bay (which is also close but no cigar) it's the only mid-capacity hopper available with factory paint.

Lee
Logged
Rockin' It Old School

Lee Weldon www.wmrywesternlines.net

Dave V

  • Crew
  • *
  • Posts: 11266
  • Gender: Male
  • Foothills Farm Studios -- Dave's Model Railroading
  • Respect: +9382
Re: BOWSER Model rolling stock
« Reply #4 on: February 28, 2008, 10:40:47 AM »
0
For Pennsy cabins and hoppers in N scale, Bowser's your only hope.  The trouble with Bowser cars, I've found, is that they tend to track poorly without replacement wheelsets.  The older H21a hoppers tended to have truck sideframes that were a tad wide.

I'm running new metal wheelsets on many of my Bowsers and they work much better.

I can't speak to Bowser's non-PRR stuff.
Logged

Wlal13again

  • Crew
  • *
  • Posts: 766
  • Gender: Male
  • Respect: +23
Re: BOWSER Model rolling stock
« Reply #5 on: February 28, 2008, 05:02:30 PM »
0
I have 4 Bowser cabin cars and a few of the hoppers. They`re OK, changed out trucks and couplers in all of them, and yes, they are made in Pennsylvania...
Logged
You`ll never find a Philly cheese steak on a menu in Philadelphia. It`s called a cheesesteak and we all know where it`s from...

Mark5

  • Crew
  • *
  • Posts: 11051
  • Always with the negative waves Moriarty ...
  • Respect: +612
Re: BOWSER Model rolling stock
« Reply #6 on: February 28, 2008, 05:23:03 PM »
0
The Bowser N "line" consists of internally developed stuff (the PRR hoppers and cabin cars) and the former Delaware Valley line of freight cars. The Delaware Valley stuff is comparable to older trainman tooling.
Logged

ñiao

  • Guest
Re: BOWSER Model rolling stock
« Reply #7 on: February 28, 2008, 09:38:03 PM »
0
Is it complicated to change the Rapidos to something nicer?
Logged

DKS

  • The Pitt
  • Crew
  • *
  • Posts: 13424
  • Respect: +7026
Re: BOWSER Model rolling stock
« Reply #8 on: February 28, 2008, 10:12:36 PM »
0
Quote from: biker_ray_pa on February 28, 2008, 03:53:16 AM
It's good quality stuff. Their HO stuff is good too. It's maybe not the best detailed stuff available, but good.

Same is true of their Z scale stuff, which has been commissioned by other businesses, most notably Full Throttle.
Logged

Wlal13again

  • Crew
  • *
  • Posts: 766
  • Gender: Male
  • Respect: +23
Re: BOWSER Model rolling stock
« Reply #9 on: February 29, 2008, 08:11:59 AM »
0
Quote from: ñiao on February 28, 2008, 09:38:03 PM
Is it complicated to change the Rapidos to something nicer?

Not really, there is a pre drilled hole on the cabooses and hopper cars to accept the mounting screw for MT couplers. Took me 20 minutes or so...
Logged
You`ll never find a Philly cheese steak on a menu in Philadelphia. It`s called a cheesesteak and we all know where it`s from...

RDG_Rich

  • Crew
  • *
  • Posts: 211
  • Gender: Male
  • Respect: 0
Re: BOWSER Model rolling stock
« Reply #10 on: February 29, 2008, 08:41:40 PM »
0
Quote
and yes, they are made in Pennsylvania...

Montoursville, PA.

Right next to English's Model Railroad Shop. It's been a couple of years since I have been there, but boy was it ever a treat when Dad would take me as a kid...

I don't do HO, or Pennsy, but I would love to have one of EACH of their loco kits.
Logged

ñiao

  • Guest
Re: BOWSER Model rolling stock
« Reply #11 on: March 01, 2008, 04:12:40 AM »
0
Thanks, Wlal13again.
Logged
Pages: [1]   Go Up
« previous next »