« previous next »
Pages: [1]   Go Down

Author Topic: PC/Kellogg X79 kit bash  (Read 1668 times)

0 Members and 1 Guest are viewing this topic.

daniel_leavitt2000

  • Crew
  • *
  • Posts: 6345
  • Respect: +1303
PC/Kellogg X79 kit bash
« on: July 01, 2015, 08:35:53 PM »
0
I'm bringing this up from the coil car thread in Product Discussion. After having some success producing an FGE 5145/5237 boxes (still not cast yet, sorry guys), I'm looking on how one would make the PC/Kellogg X79 box. Are there any drawings out there? What parts could be used?

Logged
There's a shyness found in reason
Apprehensive influence swallow away
You seem to feel abysmal take it
Then you're careful grace for sure
Kinda like the way you're breathing
Kinda like the way you keep looking away

Dave V

  • Crew
  • *
  • Posts: 11223
  • Gender: Male
  • Foothills Farm Studios -- Dave's Model Railroading
  • Respect: +9336
Re: PC/Kellogg X79 kit bash
« Reply #1 on: July 01, 2015, 08:51:38 PM »
0
I don't know about drawings, but I have pics I took in Omaha (from 2008):













Logged

daniel_leavitt2000

  • Crew
  • *
  • Posts: 6345
  • Respect: +1303
Re: PC/Kellogg X79 kit bash
« Reply #2 on: July 02, 2015, 06:17:43 PM »
0
Thanks Dave. Are those 4 over 4 improved dreadnaught ends?
Logged
There's a shyness found in reason
Apprehensive influence swallow away
You seem to feel abysmal take it
Then you're careful grace for sure
Kinda like the way you're breathing
Kinda like the way you keep looking away

Dave V

  • Crew
  • *
  • Posts: 11223
  • Gender: Male
  • Foothills Farm Studios -- Dave's Model Railroading
  • Respect: +9336
Re: PC/Kellogg X79 kit bash
« Reply #3 on: July 02, 2015, 07:05:33 PM »
0
Quote from: daniel_leavitt2000 on July 02, 2015, 06:17:43 PM
Thanks Dave. Are those 4 over 4 improved dreadnaught ends?

No clue.
Logged

chessie system fan

  • Crew
  • *
  • Posts: 1156
  • Gender: Male
  • Respect: +656
Re: PC/Kellogg X79 kit bash
« Reply #4 on: July 02, 2015, 09:16:50 PM »
0
I saved the drawing from the Rail Yard Models website.  I'll see if I can find it.

I think the ends might be the same as a MT Greenville car?  The problem will be the roof.  Nothing like it is close in N scale without major compromises.
Logged
Aaron Bearden

daniel_leavitt2000

  • Crew
  • *
  • Posts: 6345
  • Respect: +1303
Re: PC/Kellogg X79 kit bash
« Reply #5 on: July 02, 2015, 11:48:25 PM »
0
It is just a peaked X panel right? What makes it so unique?
Logged
There's a shyness found in reason
Apprehensive influence swallow away
You seem to feel abysmal take it
Then you're careful grace for sure
Kinda like the way you're breathing
Kinda like the way you keep looking away

Ike the BN Freak

  • Crew
  • *
  • Posts: 1554
  • Respect: +90
Re: PC/Kellogg X79 kit bash
« Reply #6 on: July 03, 2015, 01:59:52 AM »
0
This is one of those cars I'd like 1 or 2 of. I remember them from as a kid at Omaha.
Logged

chessie system fan

  • Crew
  • *
  • Posts: 1156
  • Gender: Male
  • Respect: +656
Re: PC/Kellogg X79 kit bash
« Reply #7 on: July 03, 2015, 01:33:19 PM »
0
I got my MT Greenville car out and that is indeed the correct ends.  The problem with the roof is that it is almost but not quite perfectly flat.  I predict you'll have to splice a roof from 50' sections and then heat it and flatten it.  You might be able to get away with a completely flat roof, if there's one the correct width.  The MT Berwick is too wide.  Maybe this would be a good Shapeways piece?

If you can pull this off it'll be really cool!
Logged
Aaron Bearden

Wlal13again

  • Crew
  • *
  • Posts: 766
  • Gender: Male
  • Respect: +23
Re: PC/Kellogg X79 kit bash
« Reply #8 on: July 04, 2015, 12:47:36 PM »
0
Logged
You`ll never find a Philly cheese steak on a menu in Philadelphia. It`s called a cheesesteak and we all know where it`s from...

daniel_leavitt2000

  • Crew
  • *
  • Posts: 6345
  • Respect: +1303
Re: PC/Kellogg X79 kit bash
« Reply #9 on: July 04, 2015, 04:38:23 PM »
0
An easy way to flatten a peaked roof is to run a blade along the joint inside. After a few cuts, the roof will flatten and not destroy the detail on the outside.

If I need to go flat, the LL X71 should work if sliced and spliced.
Logged
There's a shyness found in reason
Apprehensive influence swallow away
You seem to feel abysmal take it
Then you're careful grace for sure
Kinda like the way you're breathing
Kinda like the way you keep looking away

cjm413

  • Crew
  • *
  • Posts: 1473
  • Respect: +145
Re: PC/Kellogg X79 kit bash
« Reply #10 on: July 05, 2015, 04:41:05 PM »
0
Quote from: chessie system fan on July 02, 2015, 09:16:50 PM
I saved the drawing from the Rail Yard Models website.  I'll see if I can find it.

I think the ends might be the same as a MT Greenville car?  The problem will be the roof.  Nothing like it is close in N scale without major compromises.

Interesting project - if my kids weren't bouncing off the walls right now, I'd look for an old Con-Cor Greenville car to see if those ends had any potential.

CJM
Logged

dcutting

  • Crew
  • *
  • Posts: 359
  • Gender: Male
  • Respect: -57
Re: PC/Kellogg X79 kit bash
« Reply #11 on: July 06, 2015, 07:13:46 PM »
0
Would it help if I were to do parts for this in 3D?

-David
Logged
David Cutting

daniel_leavitt2000

  • Crew
  • *
  • Posts: 6345
  • Respect: +1303
Re: PC/Kellogg X79 kit bash
« Reply #12 on: July 06, 2015, 08:19:49 PM »
0
Dave, it depends on what we have available. The biggest problem would probably be the exterior post sides, but well see.
Logged
There's a shyness found in reason
Apprehensive influence swallow away
You seem to feel abysmal take it
Then you're careful grace for sure
Kinda like the way you're breathing
Kinda like the way you keep looking away
Pages: [1]   Go Up
« previous next »