Author Topic: static grass techniquesresults for N scale  (Read 2279 times)

0 Members and 1 Guest are viewing this topic.

arbomambo

  • Crew
  • *
  • Posts: 1419
  • Respect: +1137
static grass techniquesresults for N scale
« on: February 20, 2015, 10:38:55 AM »
0
Hello all...Wednesday I had the chance to try something I hadn't attempted before...applying static grass electrostatically (I had used static grass flock as regular ground cover before)...
My Sweetie found this handheld version on Amazon pretty cheap ($15.00 with free shipping)...so we finally decided to attempt it on one of the T-Trak modules, the "Triple D Farm/Ranch"...
 I had already used the Woodlands Scenics flock as ground cover so I already had a base for the flock...
I'm pretty satisfied with the results and the height (any taller and I'd definitely have to get out the clippers)...I'm very pleasantly surprised at how firmly attached it is...very little to almost none was reclaimed by the vacuum.
I can't really imagine using any flocking than is longer/taller than this for N scale.
Here are some images of the areas that have been 'flocked'...
Bruce









"STILL Thrilled to be in N scale!"

Bruce M. Arbo
CATT- Coastal Alabama T-TRAK
https://nationalt-traklayout.com/


Jesse6669

  • Crew
  • *
  • Posts: 581
  • Respect: +1293
Re: static grass techniquesresults for N scale
« Reply #1 on: February 20, 2015, 10:57:18 AM »
0
Those look like some very happy cows!   

wazzou

  • Crew
  • *
  • Posts: 6728
  • #GoCougs
  • Respect: +1655
Re: static grass techniquesresults for N scale
« Reply #2 on: February 20, 2015, 11:20:17 AM »
0
I built my own following some instructions on John Cubbin's Z Trains website.  I think it cost a little over $30 dollars to construct and feel it's every bit as good as the Noch unit.
This is the only picture I have in my album that shows it pretty well.

Bryan

Member of NPRHA, Modeling Committee Member
http://www.nprha.org/
Member of MRHA


arbomambo

  • Crew
  • *
  • Posts: 1419
  • Respect: +1137
Re: static grass techniquesresults for N scale
« Reply #3 on: February 20, 2015, 11:27:35 AM »
0
I built my own following some instructions on John Cubbin's Z Trains website.  I think it cost a little over $30 dollars to construct and feel it's every bit as good as the Noch unit.
This is the only picture I have in my album that shows it pretty well.




that grass looks great for high weeds and marsh grass....!
Bruce
"STILL Thrilled to be in N scale!"

Bruce M. Arbo
CATT- Coastal Alabama T-TRAK
https://nationalt-traklayout.com/


arbomambo

  • Crew
  • *
  • Posts: 1419
  • Respect: +1137
Re: static grass techniquesresults for N scale
« Reply #4 on: February 20, 2015, 11:31:24 AM »
0
here is a pic of the one I used...I think it's a 'Grasstech' design/unit...
the only thing I'd like to do better is to control the application better...I may mask the outer edges of the basket, creating a smaller opening...giving me a more precise ability to apply to smaller areas...
Bruce

"STILL Thrilled to be in N scale!"

Bruce M. Arbo
CATT- Coastal Alabama T-TRAK
https://nationalt-traklayout.com/


JMaurer1

  • Crew
  • *
  • Posts: 1185
  • Gender: Male
  • Respect: +306
Re: static grass techniquesresults for N scale
« Reply #5 on: February 20, 2015, 11:33:34 AM »
0
$15 on Amazon! Then you got the only one since the only ones there are $145 and $200. What does yours look like? I've built one like Arbomambo's but I just have never got around to actually using it.
Sacramento Valley NRail and NTrak
We're always looking for new members

wazzou

  • Crew
  • *
  • Posts: 6728
  • #GoCougs
  • Respect: +1655
Re: static grass techniquesresults for N scale
« Reply #6 on: February 20, 2015, 11:40:21 AM »
0
It looks like yours Bruce, is based off of the flyswatter method which IMO, doesn't pack enough of a wallop to get the grass to stand up.  It always seems there is more laying down than standing upright, though YMMV.
Bryan

Member of NPRHA, Modeling Committee Member
http://www.nprha.org/
Member of MRHA


RBrodzinsky

  • Crew
  • *
  • Posts: 1205
  • Gender: Male
  • Respect: +425
Re: static grass techniquesresults for N scale
« Reply #7 on: February 20, 2015, 12:50:28 PM »
0
The main trick to getting the grass to stand up, with any of the applicators, is to make sure the mesh is fairly close to the surface (just not so close as to cause a spark, or a continuous "thread" of grass). If too far away, all you are really doing is sifting, with the electrical field not strong enough to align the fibers.
Rick Brodzinsky
Chief Engineer - JACALAR Railroad
Silicon Valley FreeMo-N

rsn48

  • Crew
  • *
  • Posts: 360
  • Gender: Male
  • Respect: +1
Re: static grass techniquesresults for N scale
« Reply #8 on: February 20, 2015, 12:53:10 PM »
0
I have the modified fly swatter flocker and it works just fine.  The only thing I'd like is to be able to have two or three selections of the sifter available, but at the price, its easy to just build another one with a different size sieve.
Hind sight is always better than foresight, except for lost opportunity costs.

basementcalling

  • Crew
  • *
  • Posts: 3542
  • Gender: Male
  • Respect: +751
Re: static grass techniquesresults for N scale
« Reply #9 on: February 20, 2015, 03:21:19 PM »
0
Hello all...Wednesday I had the chance to try something I hadn't attempted before...applying static grass electrostatically (I had used static grass flock as regular ground cover before)...
My Sweetie found this handheld version on Amazon pretty cheap ($15.00 with free shipping)...so we finally decided to attempt it on one of the T-Trak modules, the "Triple D Farm/Ranch"...
 I had already used the Woodlands Scenics flock as ground cover so I already had a base for the flock...
I'm pretty satisfied with the results and the height (any taller and I'd definitely have to get out the clippers)...I'm very pleasantly surprised at how firmly attached it is...very little to almost none was reclaimed by the vacuum.
I can't really imagine using any flocking than is longer/taller than this for N scale.
Here are some images of the areas that have been 'flocked'...
Bruce



Any chance of a link to the one your sweetie found on Amazon?
Peter Pfotenhauer

arbomambo

  • Crew
  • *
  • Posts: 1419
  • Respect: +1137
Re: static grass techniquesresults for N scale
« Reply #10 on: February 20, 2015, 03:36:28 PM »
0
searching online reveals that it is, indeed, a grasstech applicator, but Amazon doesn't seem to offer them anymore...cheapest I've found is at Micromark-$39.99
Bruce
"STILL Thrilled to be in N scale!"

Bruce M. Arbo
CATT- Coastal Alabama T-TRAK
https://nationalt-traklayout.com/


superchief

  • Crew
  • *
  • Posts: 340
  • Respect: +25
Re: static grass techniquesresults for N scale
« Reply #11 on: February 20, 2015, 05:22:48 PM »
0
Bruce I paint or use hair spray and then coat with the static grass, I have only used the woodland scenic brand. When I was in Chicago and saw the Reid Bros layout the new section of Clearbrook(was in n scale mag about a year ago or so) and Bill was using a different brand and had short or longer pieces listed in length in Millmeters, he had put down one layer and then hit it again with hairspray and recoated to get a bit taller grass and then took an eraser and made a cow trail through it, coolest thing I have seen!!!!!! ........BTW the t trak modules are looking GREAT!!!!!!!!! Gordon :D