« previous next »
Pages: [1]   Go Down

Author Topic: Reprogram decoder number  (Read 1003 times)

0 Members and 1 Guest are viewing this topic.

jjb62556

  • Crew
  • *
  • Posts: 302
  • Gender: Male
  • Respect: +41
Reprogram decoder number
« on: January 13, 2019, 01:18:42 PM »
0
I have two engines that I have change numbers on and would like to change the address to match the new numbers. I know how to program the new numbers.
The question is if I change to the new numbers will I lose all my custom setting like my speedmatching,etc and have to start from scratch?   Jim
Logged

nickelplate759

  • Crew
  • *
  • Posts: 3410
  • Respect: +1109
Re: Reprogram decoder number
« Reply #1 on: January 13, 2019, 01:28:24 PM »
0
On my system (NCE PowerCab), the answer is no, you won't lose other settings if you only change the number.  Same is true for SPROG.
Logged
George
NKPH&TS #3628

I'm sorry Dave, I'm afraid I can't do that.

jjb62556

  • Crew
  • *
  • Posts: 302
  • Gender: Male
  • Respect: +41
Re: Reprogram decoder number
« Reply #2 on: January 13, 2019, 01:44:12 PM »
0
Thanks for the reply....Jim
Logged

MK

  • Crew
  • *
  • Posts: 4143
  • Respect: +807
Re: Reprogram decoder number
« Reply #3 on: January 13, 2019, 02:18:20 PM »
0
Same for Digitrax.  I don't know of any system where changing a loco address will reset settings.
Logged

nickelplate759

  • Crew
  • *
  • Posts: 3410
  • Respect: +1109
Re: Reprogram decoder number
« Reply #4 on: January 13, 2019, 02:56:10 PM »
0
By the way, if you use the JMRI software tools (I use them with Sprog, but I believe it can also work with other controllers), then you can save all the settings for a loco (really it's saving them for the decoder) on your computer and restore them automagically under software control.   Kind of like an automatic notebook for your decoder settings.
Logged
George
NKPH&TS #3628

I'm sorry Dave, I'm afraid I can't do that.

jdcolombo

  • Crew
  • *
  • Posts: 2284
  • Respect: +995
Re: Reprogram decoder number
« Reply #5 on: January 13, 2019, 04:37:04 PM »
0
Quote from: jjb62556 on January 13, 2019, 01:18:42 PM
I have two engines that I have change numbers on and would like to change the address to match the new numbers. I know how to program the new numbers.
The question is if I change to the new numbers will I lose all my custom setting like my speedmatching,etc and have to start from scratch?   Jim

No.  Changing the address won't affect any other settings on the decoder.  But I agree with the suggestion to use JMRI's Decoder Pro.  It's an excellent tool.

John C.
Logged
Pages: [1]   Go Up
« previous next »