The "other" industrial layout...

[davefoxx]

Chris,

No berms or containment walls around the tanks?  Or was this safety procedure after your era?

DFF

[Chris333]

I haven't seen a berm on the prototype yet:
http://www.britschinc.com/Herman_Britsch_Archbold_Bulk_Plant.jpg
http://fuelmarketernews.com/wp-content/uploads/2013/07/Bulk-Plant-Rack-537x350.jpg

Besides I'm all out of room 

[robwill84]

If there's ever a leak, it just runs off the edge of the layout.

[Baronjutter]

Any updates on this?  One of my favourite layouts I'm following!

[txronharris]

I'm kinda late to the party, but I've just gone through your thread and all I can say is WOW! Seriously good stuff here. One question: Was the decision to put sheet cork on top of the foam for sound deadening purposes or did you have something else in mind? 

[Chris333]

I used to lay track right on foam and shape the foam to form the roadbed profile. Then one day I glued down cork and was able to sand it perfectly smooth so I've been rolling with it ever since. Also I used ACC to glue down the track, ACC and foam don't get along well. (I could have used a different glue)  I guess in the end the cork was not necessarily needed.

[mighalpern]

chris:
just wondering if you have more great progress on this reports page or did you move it to another.
thanks
Miguel 

[Chris333]

No more progress to report... yet.

[sizemore]

There should be a new thread called "Whatever Chris 333 is working on at the moment..."


The S.

[Philip H]

There should be a new thread called "Whatever Chris 333 is working on at the moment..."


The S.

This!

@Ed Kapuscinski can consolidate all of them for you.

[Chris333]

I like em separate so they don't get confusing. Plus you never know when I will pick this layout up where I left off    (goes off to work on another layout)

[Dave V]

This!

@Ed Kapuscinski can consolidate all of them for you.

At the rate of 10-20 per night.   

[davefoxx]

Ain't nobody but Chris got time for that.