Walthers Turntable controller wiring

[RWCJr]

When the previous layout had to be dismantled, the four wires that route the AC and DC through the controller were removed. Cannot find the pdf file that Walthers had posted with the instructions. Would someone plz post the ID on connections U, V, B1 and B2.

[Robert_56]

From the PDF
"Wiring
Connection points are marked on the underside as follows:
B1 and B2 = connect to rail power supply; powers bridge rails. To match radial tracks, you can reverse polarity by interchanging the B1 and B2 wires.
U & V = connect to AC terminals on power pack; powers drive mechanism."

[RWCJr]

Thanks, coming in the home stretch for the module control panel.