TheRailwire
General Discussion => DCC / Electronics => Topic started by: CodyO on February 13, 2021, 09:29:53 PM
-
Recently bought 4 PSX power shields
Using a ESU Cab Control system. Each PSX has a direct line to the booster and the booster is not tripping.
Whenever 1 of the 4 power shields trips and tries to auto-reset the other 3 all flash for a second causing a brief power outage on them.
But while 1 is tripped trains can run on the other 3 besides that brief pause while the tripped one tries to autorest.
I`ve tried increasing CV65(Length of Delay) with no changes.